A hybrid of genetic algorithm and particle swarm optimization for reducing material waste in extrusion-basedadditive manufacturing

Abstract

Purpose

The purpose of this paper is to report the design of a lightweight tree-shaped support structure for fused deposition modeling (FDM) three-dimensional (3D) printed models when the printing path is considered as a constraint.

Design/methodology/approach

A hybrid of genetic algorithm (GA) and particle swarm optimization (PSO) is proposed to address the topology optimization of the tree-shaped support structures, where GA optimizes the topologies of the trees and PSO optimizes the geometry of a fixed tree-topology. Creatively, this study transforms each tree into an approximate binary tree such that GA can be applied to evolve its topology efficiently. Unlike FEM-based methods, the growth of tree branches is based on a large set of FDM 3D printing experiments.

Findings

The hybrid of GA and PSO is effective in reducing the volume of the tree supports. It is shown that the results of the proposed method lead to up to 46.71% material savings in comparison with the state-of-the-art approaches.

Research limitations/implications

The proposed approach requires a large number of printing experiments to determine the function of the yield length of a branch in terms of a set of critical parameters. For brevity, one can print a small set of tree branches (e.g. 30) on a single platform and evaluate the function, which can be used all the time after that. The steps of GA for topology optimization and those of PSO for geometry optimization are presented in detail.

Originality/value

The proposed approach is useful for the designers and manufacturers to save materials and printing time in fabricating complex models using the FDM technique. It can be adapted to the design of support structures for other additive manufacturing techniques such as Stereolithography and selective laser melting.

Citation

Feng, R., Jiang, J., Sun, Z., Thakur, A. and Wei, X. (2021), "A hybrid of genetic algorithm and particle swarm optimization for reducing material waste in extrusion-basedadditive manufacturing", Rapid Prototyping Journal, Vol. 27 No. 10, pp. 1872-1885. https://doi.org/10.1108/RPJ-11-2020-0292