Decorative 3D printing on textiles using elastomer TPU filament under different printing conditions

Abstract

Purpose

New sustainable approaches to fashion products are needed due to the demand for customization, better quality and cost reduction. Therefore, the decoration of fashion products using 3D printing technology can create a new direction for manufacturing science.

Design/methodology/approach

This study aims to optimize the 3D printing of soft TPU material on textiles. In the past decade, trials of using 3D printing in tailored fashion products have been done due to the 3D printing simplicity, low cost of materials and time reduction. Therefore, soft polymers can be multi-layer stepped-deposited smoothly with the fused filament fabrication process.

Findings

Even though there have been many attempts in the literature to 3D print multilayer polymer filaments directly onto textile fabrics by special-purpose 3D printers, only a few reports of decorative or personalized artefact 3D printing using open-platform filament material extrusion 3D printers. Printing speed, nozzle Z distance, textile fabric thickness and deposited strand height significantly affect 3D printing on textile fabric.

Originality/value

This study investigates the potential of 3D printing on textiles by changing the printing speed, nozzle hot end, Z distance and layer thickness. It presents two critical case studies of 3D printing soft thermoplastic polyurethane material on a cotton T-shirt and on a tulle textile to reveal the 3D printing on textile fabrics manufacturing challenges.

Citation

Kechagias, J.D., Chaidas, D. and Spahiu, T. (2024), "Decorative 3D printing on textiles using elastomer TPU filament under different printing conditions", Rapid Prototyping Journal, Vol. 30 No. 10, pp. 2033-2042. https://doi.org/10.1108/RPJ-03-2024-0106