Predictive modeling for online in-plane shape deviation inspection and compensation of additive manufacturing

Abstract

Purpose

Limited geometric accuracy is one of the major challenges that hinder the wider application of additive manufacturing (AM). This paper aims to predict in-plane shape deviation for online inspection and compensation to prevent error accumulation and improve shape fidelity in AM.

Design/methodology/approach

A sequence-to-sequence model with an attention mechanism (Seq2Seq+Attention) is proposed and implemented to predict subsequent layers or the occluded toolpath deviations after the multiresolution alignment. A shape compensation plan can be performed for the large deviation predicted.

Findings

The proposed Seq2Seq+Attention model is able to provide consistent prediction accuracy. The compensation plan proposed based on the predicted deviation can significantly improve the printing fidelity for those layers detected with large deviations.

Practical implications

Based on the experiments conducted on the knee joint samples, the proposed method outperforms the other three machine learning methods for both subsequent layer and occluded toolpath deviation prediction.

Originality/value

This work fills a research gap for predicting in-plane deviation not only for subsequent layers but also for occluded paths due to the missing scanning measurements. It is also combined with the multiresolution alignment and change point detection to determine the necessity of a compensation plan with updated G-code.

Citation

Wang, H., Al Shraida, H. and Jin, Y. (2024), "Predictive modeling for online in-plane shape deviation inspection and compensation of additive manufacturing", Rapid Prototyping Journal, Vol. 30 No. 2, pp. 350-363. https://doi.org/10.1108/RPJ-03-2023-0076