Laser powder bed fusion additive manufacturing of copper wicking structures: fabrication and capillary characterization

Abstract

Purpose

An integral component in heat pipes (HPs) and vapor chambers (VCs) is a porous wicking structure. Traditional methods for manufacturing wicking structures within HPs and VCs involve secondary manufacturing processes and are generally limited to simple geometries. This work aims to leverage the unprecedented level of design freedom of laser powder bed fusion (LPBF) additive manufacturing (AM) to produce integrated wicking structures for HPs and VCs.

Design/methodology/approach

Copper wicking structures are fabricated through LPBF via partial sintering and via the formation of square, hexagonal and rectangular arrangements of micro-pins and micro-grooves, produced in multiple build directions. Wicks are characterized by conducting capillary performance analysis through the measurement of porosity, permeability and capillary rate-of-rise.

Findings

Copper wicking structures were successfully fabricated with capillary performance, K/reff, ranging from 0.186–1.74 µm. The rectangular-arrangement micro-pin wick presented the highest performance.

Originality/value

This work represents the first published report on LPBF AM of copper wicking structures for HPs/VCs applications and represents foundational knowledge for fabricating complete assemblies of copper VCs and HPs through LPBF AM.

Citation

Mezghani, A., Nassar, A.R., Dickman, C.J., Valdes, E. and Alvarado, R. (2021), "Laser powder bed fusion additive manufacturing of copper wicking structures: fabrication and capillary characterization", Rapid Prototyping Journal, Vol. 27 No. 6, pp. 1181-1188. https://doi.org/10.1108/RPJ-01-2021-0016