To read this content please select one of the options below:

Medium optimization and downstream process design for the augmented yield of β-Carotene using fungi Blakeslea trispora

Umesh Luthra (Department of Biotech, Bharath Institute of Higher Education and Research, Selaiyur, India)
Prabhakar Babu (Bharath Institute of Higher Education and Research, Selaiyur, India)
Remya R.R. (Centre for Material Engineering and Regenerative medicine, Bharath Institute of Higher Education and Research, Selaiyur, India)
Angeline Julius (Centre for Material Engineering and Regenerative medicine, Bharath Institute of Higher Education and Research, Selaiyur, India)
Yogesh Patel (Bharath Institute of Higher Education and Research, Selaiyur, India)
Ramesh Jajula Veera (Bharath Institute of Higher Education and Research, Selaiyur, India)
Ilma Majeed (Bharath Institute of Higher Education and Research, Selaiyur, India)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 18 October 2021

Issue publication date: 8 December 2022

121

Abstract

Purpose

β-Carotene is the most appropriate and significant precursor of vitamin A. Synthetic carotene supplements have been known to pose a threat to human health, making natural sources such as the indefensible choice for the production and extraction of carotene.

Design/methodology/approach

This study considers Blakeslea trispora, a filamentous fungus, as a source of production of carotenoids by fermentation and wet and dry mycelium were used to analyse and obtain better extraction results.

Findings

In this study, natural oils such as soy oil and cottonseed oil were incorporated into fermentation media to increase the production of carotene. For the optimization process, Plackett–Burman and one-factor-at-a-time (OVAT) models were identified as being of great value.

Originality/value

OVAT was carried out for corn starch because it plays a major role in the production of carotene and the corn starch at 30 g/L concentration has shown the maximum activity of 3.48 mg/gm. After optimizing process variables, submerged fermentation was eventually carried out under highly controlled media conditions. The resulting product was quantified using UV spectroscopy and extraction of carotene has been observed in the presence of various solvents. Among a range of solvents used, the methylene Di chloride produced-carotene at 86% recovery at a significantly lower temperature of 35°C.

Keywords

Citation

Luthra, U., Babu, P., R.R., R., Julius, A., Patel, Y., Jajula Veera, R. and Majeed, I. (2022), "Medium optimization and downstream process design for the augmented yield of β-Carotene using fungi Blakeslea trispora", Pigment & Resin Technology, Vol. 51 No. 6, pp. 574-580. https://doi.org/10.1108/PRT-05-2021-0055

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles