To read this content please select one of the options below:

Effect of infill walls on cumulative plastic deformation energy of RC frame structures

Bing Bing Tu (College of Science, Xi’an University of Science and Technology, Xi’an, China) (State Key Laboratory of Green Building in Western, Xi’an University of Architecture and Technology, Xi’an, China)

Multidiscipline Modeling in Materials and Structures

ISSN: 1573-6105

Article publication date: 8 October 2019

Issue publication date: 5 February 2020

73

Abstract

Purpose

A large number of earthquake damages showed that infill walls have obvious influence on the seismic damage performance of RC frame structures. The purpose of this paper is to study the effect of infill walls on the cumulative plastic deformation energy of RC frame structures, for which four RC frame structures are build and the time-history response analysis under unidirectional seismic action is presented.

Design/methodology/approach

The time-history response analysis under unidirectional seismic action is presented. Then the effect of periodic reduction coefficient on the cumulative plastic deformation energy of the structures, the beams and the columns is investigated.

Findings

Finally, the quantitative calculation formulas are provided. The results show that the periodic reduction coefficient has an obvious effect on the distribution of the accumulated plastic deformation energy, and the influence rules are presented here.

Originality/value

The effect of infill walls on the cumulative plastic deformation energy of RC frame structures is quantitatively analyzed here.

Keywords

Acknowledgements

This work was supported by the Open Project of State Key Laboratory of Green Building in Western China (LSKF201915) and the Natural Science Foundation of Shaanxi Province of China (2019JQ-354). This financial support is gratefully acknowledged.

Citation

Tu, B.B. (2020), "Effect of infill walls on cumulative plastic deformation energy of RC frame structures", Multidiscipline Modeling in Materials and Structures, Vol. 16 No. 2, pp. 293-305. https://doi.org/10.1108/MMMS-12-2018-0224

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles