Multidiscipline Modeling in Materials and Structures
Issue(s) available: 64 – From Volume: 1 Issue: 1, to Volume: 16 Issue: 2
Category:
Mechanical and Materials EngineeringVolume 16
Volume 15
Volume 14
Volume 13
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Volume 1
The effect of winding patterns on the mechanical behavior of filament-wound cylinder shells
Zhangxin Guo, Zhonggui Li, Junjie Cui, Yongcun Li, Yunbo LuanThe purpose of this paper is to present a finite element analysis (FEA) of filament-wound composites, as well as application of these materials.
Study of chiroptical effects on the novel chiral photonic structure
Chemseddine Zara, Zinelabiddine Mezache, Fatiha BenabdelazizThe purpose of this paper is to demonstrate a novel chiral photonic crystal with thin thickness and small unit cells via numerical calculations. The multi-band circular…
Research on dynamic characteristics of compensation mechanism for large-power wind turbine disc brake
Yu Liu, Jie Hao, Panli Kang, Zhihua Sha, Fujian Ma, Dapeng Yang, Shengfang ZhangThe purpose of this paper is to establish a rigid–flexible coupling model of wind turbine disc brake to simulate the actual working condition of the wind turbine brake and…
Moisture absorption in thick composite plates: modelling and experiments
Giacomo Canale, Moustafa Kinawy, Prabhakar Sathujoda, Angelo Maligno, Roberto Guglielmo CitarellaWhen a thick structure is, on the contrary, subjected to moisture absorption, a fairly long time may be needed to reach full saturation. It is, therefore, important to…
Unsteady magnetohydrodynamic radiative liquid thin film flow of hybrid nanofluid with thermophoresis and Brownian motion
C. Sulochana, S.R. AparnaThe purpose of this paper is to analyze heat and mass transport mechanism of unsteady MHD thin film flow of aluminium–copper/water hybrid nanofluid influenced by…
Modeling of memory-dependent derivatives with the state-space approach
Siddhartha BiswasThe purpose of this paper is to deal with a new generalized model of thermoelasticity theory with memory-dependent derivatives (MDD).
A novel generalized thermoelasticity with higher-order time-derivatives and three-phase lags
Ahmed E. AbouelregalIn this work, a modified thermoelastic model of heat conduction, including higher order of time derivative, is constructed by extending the Roychoudhuri model (TPL…
Elastic–plastic deformation and residual stresses in helical springs
Vladimir KobelevThe purpose of this paper is to develop the method for the calculation of residual stress and enduring deformation of helical springs.
Re-modified quintic B-spline collocation method for the solution of Kuramoto–Sivashinsky type equations
Neeraj Dhiman, Mohammad TamsirThe purpose of this paper is to present a new method, namely, “Re-modified quintic B-spline collocation method” to solve the Kuramoto–Sivashinsky (KS) type equations. In…
Study of Love-type wave vibrations in double sandy layers on half-space of viscoelastic: An analytical approach
Raju Kumhar, Santimoy Kundu, Manisha Maity, Shishir GuptaThe purpose of this paper is to examine the dependency of dispersion and damping behavior of Love-type waves on wave number in a heterogeneous dry sandy double layer of…
Dynamical and optimal procedure to analyze the attributes of yield exhibiting material with double diffusion theories
Muhammad Sohail, Sana TariqThermal and species transport of magneto hydrodynamic Casson liquid over a stretched surface is investigated theoretically in this examination for the three-dimensional…
Investigating thermal developing zone of compressible laminar flow inside hot tube
Bahador Abolpour, Rahim ShamsoddiniIncreasing the temperature of gas flows passing through hot tubes is one of the industrial interests. Operations in the gas phase with high temperature variations involve…
Construction principle of NES shock absorber and its application in frame structure
Haixu Yang, Feng Zhu, Haibiao Wang, Liang Yu, Ming ShiThe purpose of this paper is to describe the structure of nonlinear dampers and the dynamic equations, and nonlinear realization principles and optimize the parameters of…
Thermal performance of fully wet longitudinal porous fin with temperature-dependent thermal conductivity, surface emissivity and heat transfer coefficient
G. Sowmya, B.J. Gireesha, O.D. MakindeThe purpose of this paper is to study the thermal behaviour of a fully wet porous fin of longitudinal profile. The significance of radiative and convective heat transfer…
Framing the hydrothermal features of magnetized TiO2–CoFe2O4 water-based steady hybrid nanofluid flow over a radiative revolving disk
Nilankush Acharya, Suprakash Maity, Prabir Kumar KunduHybrid nanofluids are of significant engrossment for their considerable heat transport rate. The steady flow of an incompressible viscous electrically conducted hybrid…
Radiation and non-uniform heat sink/source effects on 2D MHD flow of CNTs-H2O nanofluid over a flat porous plate
Himanshu Upreti, Sawan Kumar Rawat, Manoj KumarThe purpose of this paper is to examine the velocity and temperature profile for a two-dimensional flow of single- and multi-walled nanotubes (CNTs)/H2O nanofluid over a…
An applied model for predicting memory effects of flexible polyurethane foams: Fractional derivative-to-hereditary combined approach
Makram Elfarhani, Ali Mkaddem, Ahmed A. Alzahrani, Abdullah S. Bin Mahfouz, Abdessalem Jarraya, Mohamed HaddarThe efficiency of fractional derivative and hereditary combined approach in modeling viscoelastic behavior of soft foams was successfully addressed in Elfarhani et al.…
An algorithmic approach to the multiple impact of a disk in a corner
Claudia Fassino, Stefano PasqueroThe purpose of this paper is to present and analyze the iterative rules determining the impulsive behavior of a rigid disk having a single or possibly multiple…
Analysis of bioconvection in the suspension of Maxwell nanoparticles with gyrotactic microorganisms: A Prandtl effective approach
S.U. Khan, Sabir Ali Shehzad, N. AliAn increment in energy efficiency by employing nanoparticles is a hot topic of research in present era due to its abundant implications in modern engineering and…
The corrosion behavior of ferrous materials immersed in acidic-media using D-optimal design
Daniel Obregón Valencia, Halter García Sánchez, Isabel Díaz TangThe purpose of this paper is to model the corrosion rate behavior for two ferrous materials, carbon steel AISI 1020 and stainless steel AISI 304, immersed in ferric…
Modeling of electrical characteristics of photovoltaic solar arrays with protection against current overloads based on PolySwitch elements
A.S. Tonkoshkur, A.V. IvanchenkoThe purpose of this paper is to minimize and prevent current overloads (including the elimination of abnormal and fire hazardous situations) in photovoltaic solar arrays…
Entropy generation analysis of Casson fluid flow through a vertical microchannel under combined effect of viscous dissipation, joule heating, hall effect and thermal radiation
B.J. Gireesha, S. SindhuFully developed Casson fluid flow through vertical microchannel is deliberated in the presence of thermal radiation. The two predominant features of micro scale phenomenon…
Numerical study of the particles segregation phenomenon in the fluidized beds
Samaneh Karami, Ataallah Soltani Goharrizi, Bahador Abolpour, Samira DarijaniThe purpose of this paper is to present a computational fluid dynamic simulation for the investigation of the particles segregation phenomenon in the gas–solid fluidized beds.
Design-of-experiments application in the friction stir welding of aluminium alloy AA 8011-h14 for structural application
Navneet Khanna, Mahesh Bharati, Prachi Sharma, Vishvesh J. BadhekaThe demand for aluminium alloys has been increasing in almost all the fields. In this study, the friction stir welding (FSW) of similar aluminium alloy AA 8011-h14 has…
ISSN:
1573-6105Online date, start – end:
2005Copyright Holder:
Emerald Publishing LimitedOpen access:
hybridEditors:
- Dr Xiao-Ping Zhang
- Professor Zhufeng Yue
- Prof Heng Xiao
Further Information
