Productivity gains through standardization-of-work in a manufacturing company

Abstract

Purpose

The purpose of this paper is to identify the non-value-adding activities (NVAs) of core making process and to eliminate them through the standardization-of-work (SW) procedures in a manufacturing company.

Design/methodology/approach

The action-research methodology was adopted for the current study. First, various lean tools were identified through literature review, and the bottleneck area was identified in discussion with the shop-floor executives. NVAs were recorded after a continuous process study including method study and motion analysis followed by the standard operating procedure. Second, the standardized work combination tables were prepared and NVAs were eliminated using the SW procedures. SW has been opted because it is a set of actions which helps in analyzing, improving and controlling the process and it leads to continual improvement.

Findings

The production logbook revealed that the capacity in this particular workstation was 54 pieces per 7 h work shift against the current production of approx. 45–50 pieces (past data). SW saved 31.6 s per cycle which boosted the production up to 58 pieces per 7 h work shift. Finally, the authors came to know that the productivity of this particular process increased up to 6.5 percent which may upsurge if this action is executed continually with the support from shop-floor executives and management. These results were also compared with previous research works in this area and found significant relevance, and hence, the results appear to be reliable.

Research limitations/implications

This is a unique study in itself which explores the lean model by assessing NVAs of core making process. The proposed approach needs to be tested across different other core making processes of the case company so as to generalize the effectiveness of SW as well as the results obtained in the current study.

Practical implications

The current study illustrates an important step to give more visibility to the lean concept by addressing the problem of lack of standard procedures. This study will help the shop-floor executives and managers to focus their efforts in achieving high performance through effective implementation of SW. The study should be of the interest of researchers in the area of lean manufacturing, operations management, productivity analysis, etc.

Originality/value

The findings of this study are based on the problem formulation for productivity gains using SW procedures in the case company. The study introduces a new perspective for the execution of SW for core making processes. SW created transparency in workflow, enhanced the safety and eliminated the 3Ms. The outcome of the current study was discussed with the production team and management of the company to validate the productivity gains and received an optimistic response. Most importantly, these improvements were achieved with no investment in machinery or tooling.

Citation

Mor, R.S., Bhardwaj, A., Singh, S. and Sachdeva, A. (2019), "Productivity gains through standardization-of-work in a manufacturing company", Journal of Manufacturing Technology Management, Vol. 30 No. 6, pp. 899-919. https://doi.org/10.1108/JMTM-07-2017-0151