Study on the performance of gas foil thrust bearings with stacked bump foils

Abstract

Purpose

This paper aims to improve the load capacity of gas foil thrust bearing (GFTB) and to introduce and study a novel bearing with stacked bump foils.

Design/methodology/approach

For the proposed novel GFTB supported by stacked foils, some bump-type gaskets with several partial arches are inserted below the regular bump foil, and the height of each arch can be made differently. These features make the bump foil thickness and height gradually increase, which can bring enhanced support stiffness and convergent film at the trailing edge. Based on a new nonlinear bump stiffness model considering bump rounding and friction force, the finite element and finite difference method were used to solve the coupling Reynolds equation, energy equation and foil deformation equation. Finally, the structural stiffness and static characteristics of the novel GFTB were gained and compared with the traditional bearing.

Findings

The novel GFTB has an additional convergence effect in the parallel section, which improves the static performance of bearing. The bearing capacity, friction moment, power loss and temperature rise of the novel GFTB are all higher than those of the traditional bearing, and the static characteristics are related to the parameters of stacked bump foils.

Originality/value

The stacked bump foils bring a fundamental enhancement on the load capacity of GFTB. The results are expected to be helpful to bearing designers, researchers and academicians concerned.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0449/

Citation

Hu, H., Feng, M. and Ren, T. (2020), "Study on the performance of gas foil thrust bearings with stacked bump foils", Industrial Lubrication and Tribology, Vol. 72 No. 6, pp. 761-769. https://doi.org/10.1108/ILT-10-2019-0449