To read this content please select one of the options below:

Experimental comparison between the Stribeck curves of water lubricated rubber bearing with straight and spiral grooves

Guangwu Zhou (School of Aeronautics and Astronautics, Sichuan University, Chengdu, China and College of Polymer Science and Engineering, Sichuan University, Chengdu, China and The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, China)
Xiongwei Mi (School of Aeronautics and Astronautics, Sichuan University, Chengdu, China)
Jiaxu Wang (School of Aeronautics and Astronautics, Sichuan University, Chengdu, China and The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, China)
Rukang Hu (School of Aeronautics and Astronautics, Sichuan University, Chengdu, China)

Industrial Lubrication and Tribology

ISSN: 0036-8792

Article publication date: 13 August 2018

Issue publication date: 22 August 2018

255

Abstract

Purpose

The research purpose of this paper is to obtain a transition process of lubrication condition of water-lubricated rubber bearing (WLRB) by investigating Stribeck curve of WLRB with either straight grooves or spiral grooves using a comparison experiment and providing guidance for structure optimization and application extension of WLRB.

Design/methodology/approach

This study tested the Stribeck curve of WLRB with either straight or spiral grooves using a comparison experiment; the variables used are rotary speed and external load.

Findings

Stribeck curves of WLRB with straight or spiral grooves under varied load are obtained with the experiments, and the speed turning points when the lubrication condition of WLRB transit are acquired. Research results indicate that the transition of the speed turning point for lubrication condition of WLRB with spiral grooves is smaller than that of WLRB with straight grooves. Besides, it was found that within the whole speed range, the friction coefficient of WLRB with straight grooves decreases with the increase in load under the same speed. However, Stribeck curves of WLRB with spiral grooves show that the coefficient increases first and then decreases with the increase in load and finally comes to a steady value. Under the same rotary speed and external load, the friction coefficient of WLRB with spiral grooves is smaller than that of WLRB with straight grooves, claiming that the WLRB with spiral grooves has better lubrication properties.

Originality/value

By testing the Stribeck curve of WLRB with straight grooves or spiral grooves using the comparison experiment, lubrication properties of the WLRB are obtained. The transition mechanism of the lubrication condition for WLRB is acquired, revealing the effects of speed and load on the lubrication property. The research offers a scientific basis for the structure optimization of WLRB.

Keywords

Acknowledgements

The present study is partially supported by the National Science Foundation of China (51605316), the opening fund of State Key Laboratory of Mechanical Transmissions (SKLMT-KFKT-201708) and the Fundamental Research Funds for the Central Universities of China (SCU2015D014).

Citation

Zhou, G., Mi, X., Wang, J. and Hu, R. (2018), "Experimental comparison between the Stribeck curves of water lubricated rubber bearing with straight and spiral grooves", Industrial Lubrication and Tribology, Vol. 70 No. 7, pp. 1326-1330. https://doi.org/10.1108/ILT-10-2017-0296

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles