Friction coefficient study of nanocomposite Al₂O₃–NbC obtained by spark plasma sintering-SPS

Abstract

Purpose

This study aims to investigate the friction coefficient of Al2O3–NbC nanocomposite obtained by spark plasma sintering sliding against a steel ball.

Design/methodology/approach

Tribological tests were carried out using a reciprocating nanotribometer in a ball on flat configuration with normal loads in the range from 10 to 100 mN under dry conditions. Surface changes were analyzed by confocal microscopy and 3D profilometry.

Findings

The values of the friction coefficient varied from 0.15 to 0.6 and are independent of the applied load.

Originality/value

The tribological behavior is attributed to fracture in the contact region and the effect of wear debris.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0356/

Citation

Dantas, S.M.C., Cuppari, M.G.D.V. and Hernandes, V.T. (2020), "Friction coefficient study of nanocomposite Al₂O₃–NbC obtained by spark plasma sintering-SPS", Industrial Lubrication and Tribology, Vol. 72 No. 9, pp. 1087-1094. https://doi.org/10.1108/ILT-08-2019-0356