Effect of spinning for different nose shape projectiles undergoing normal impact on Al 7075-T651 target

Abstract

Purpose

The effect of spinning has been studied and analysed for different projectile shapes such as ogive, blunt, cylindrical and conical by using numerical simulations.

Design/methodology/approach

Projectile shape is one of the important parameters in the penetration mechanism. The present study deals with the failure mechanisms and ballistic evaluation for different nose-shaped projectiles undergoing normal impact with spinning. Materials characterization has been made by Johnson–Cook strength and failure models, and LS-DYNA simulations are used to analyse the impact of steel projectiles on an Al 7075-T651 target at different impact velocities under normal impact conditions. The experimental results from the literature are used to validate the model. Based on the residual velocity values, the Recht-Ipson model has been curve-fitted and approximate ballistic limit velocity has been evaluated. The approximated ballistic limit velocity is found to be 3.4% higher than the experimental results and compared well with the experimental results. Subsequently, the validated model conditions are used to study and analyse the effect of spinning for different nose-shaped projectiles undergoing normal impact conditions.

Findings

The ductile hole failure is observed for the ogive nose projectile, petals are formed and fragmented for the conical projectile, and plugging is observed for cylindrical projectiles. A Recht-Ipson curve is presented for each spinning condition for each projectile shape and the ballistic limit has been evaluated for each condition.

Originality/value

The proposed research outputs are original and innovative and, have a lot of importance in defence applications, particularly in arms and ammunition.

Citation

Vaggu, P. and Panigrahi, S.K. (2024), "Effect of spinning for different nose shape projectiles undergoing normal impact on Al 7075-T651 target", International Journal of Structural Integrity, Vol. 15 No. 6, pp. 1053-1078. https://doi.org/10.1108/IJSI-06-2024-0088