Development of the 3D dome model based on a terrestrial laser scanner

Abstract

Purpose

Laser scanning technique is used to measure and model objects using point cloud data generated laser pulses. Conventional techniques to construct 3D models are time consuming, costly and need more manpower. The purpose of this paper is to assess the 3D model of the Sultan Salahuddin Abdul Aziz Shah Mosque’s main dome using a terrestrial laser scanner.

Design/methodology/approach

A laser scanner works through line of sight, which indicates that multiple scans need to be taken from a different view to ensure a complete data set. Targets must spread in all directions, and targets should be placed on fixed structures and flat surfaces for the normal scan and fine scan. After the scanning operation, point cloud data from the laser scanner were cleaned and registered before a 3D model could be developed.

Findings

As a result, the reconstruction of the 3D model was successfully developed. The samples are based on the triangle dimension, curve line, horizontal dimension and vertical dimension at the dome. The standard deviation and accuracy are calculated based on the comparison of the 21 samples taken between the high-resolution and low-resolution scanning data.

Originality/value

There are many ways to develop the 3D model and based on this study, the less complex ways also produce the best result. The authors implement the different types of dimensions for the 3D model assessment, which have not yet been considered in the past.

Citation

Abu Hanipah, A.F.F. and Tahar, K.N. (2018), "Development of the 3D dome model based on a terrestrial laser scanner", International Journal of Building Pathology and Adaptation, Vol. 36 No. 2, pp. 122-136. https://doi.org/10.1108/IJBPA-05-2017-0024