To read this content please select one of the options below:

Implementation of a multi-layer radiation propagation model for simulation of microwave heating in hydrate reservoirs

Akash K. Gupta (Gas Hydrate Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India)
Rahul Yadav (Gas Hydrate Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India)
Malay K. Das (Gas Hydrate Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India)
Pradipta K. Panigrahi (Gas Hydrate Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 17 May 2021

Issue publication date: 5 January 2022

135

Abstract

Purpose

This paper aims to present the implementation of a multi-layer radiation propagation model in simulations of multi-phase flow and heat transfer, for a dissociating methane hydrate reservoir subjected to microwave heating.

Design/methodology/approach

To model the induced heterogeneity due to dissociation of hydrates in the reservoir, a multiple homogeneous layer approach, used in food processes modelling, is suggested. The multi-layer model is incorporated in an in-house, multi-phase, multi-component hydrate dissociation simulator based on the finite volume method. The modified simulator is validated with standard experimental results in the literature and subsequently applied to a hydrate reservoir to study the effect of water content and sand dielectric nature on radiation propagation and hydrate dissociation.

Findings

The comparison of the multi-layer model with experimental results show a maximum difference in temperature estimation to be less than 2.5 K. For reservoir scale simulations, three homogeneous layers are observed to be sufficient to model the induced heterogeneity. There is a significant contribution of dielectric properties of sediments and water content of the reservoir in microwave radiation attenuation and overall hydrate dissociation. A high saturation reservoir may not always provide high gas recovery by dissociation of hydrates in the case of microwave heating.

Originality/value

The multi-layer approach to model microwave radiation propagation is introduced and tested for the first time in dissociating hydrate reservoirs. The multi-layer model provides better control over reservoir heterogeneity and interface conditions compared to existing homogeneous models.

Keywords

Acknowledgements

The authors acknowledge the partial support received from ONGC Pan-IIT and Oil India Development Board in successfully carrying out this research.

Citation

Gupta, A.K., Yadav, R., Das, M.K. and Panigrahi, P.K. (2022), "Implementation of a multi-layer radiation propagation model for simulation of microwave heating in hydrate reservoirs", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 32 No. 2, pp. 684-713. https://doi.org/10.1108/HFF-12-2020-0822

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles