To read this content please select one of the options below:

Broadband surface impedance boundary conditions for higher order time domain discontinuous Galerkin method

Irene Woyna (Graduate School of Computational Engineering, Institut für Theorie Electromagnetischer Felder, Technische Universität Darmstadt, Darmstadt, Germany)
Erion Gjonaj (Institut für Theorie Elektromagnetischer Felder, Technische Universität Darmstadt, Darmstadt, Germany)
Thomas Weiland (Institut für Theorie Elektromagnetischer Felder, Technische Universität Darmstadt, Darmstadt, Germany)

Abstract

Purpose

The purpose of this paper is to present a time domain discontinuous Galerkin (DG) approach for modeling wideband frequency dependent surface impedance boundary conditions.

Design/methodology/approach

The paper solves the Maxwellian initial value problem in a computational domain, which is spatially discretized by the higher order DG method. On the boundary of the computational domain the paper applies a suitable impedance boundary condition (IBC). The frequency dependency of the impedance function is modeled by auxiliary differential equations (ADE).

Findings

The authors will study the resonance frequency and the Q factor of different types of cavity resonators including lossy materials. The lossy materials are modeled by means of IBCs. The authors will compare the results with analytical results, as well as numerical results obtained by direct calculations where lossy materials are included explicitly into the numerical model. Several convergence studies are performed which demonstrate the accuracy of the approach.

Originality/value

Modeling of frequency dependent boundary conditions in time domain with finite difference time domain method (FDTD) method is considered in numerous papers, as well as in frequency domain finite element method (FEM), and in a few papers also time domain FEM. However, FDTD method is only first order accurate and fails in modeling of complicated surfaces. FEM allows for high order accuracy, but time domain modeling is numerically extremely expensive. In frequency domain, broadband modeling of frequency dependent boundary conditions requires several simulations as opposed to the time domain, where a single simulation is needed. The time domain DG method proposed in this paper allows to overcome the difficulties. The authors introduce a broadband surface impedance formulation based on the ADE approach for the higher order DG method.

Keywords

Acknowledgements

This work is supported by the Graduate School of Computational Engineering at Technische Universität Darmstadt.

Citation

Woyna, I., Gjonaj, E. and Weiland, T. (2014), "Broadband surface impedance boundary conditions for higher order time domain discontinuous Galerkin method", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 33 No. 4, pp. 1082-1096. https://doi.org/10.1108/COMPEL-08-2013-0260

Publisher

:

Emerald Group Publishing Limited

Copyright © 2014, Emerald Group Publishing Limited

Related articles