Influence of layer thickness on mechanical properties in stereolithography
Abstract
Purpose
Mechanical properties such as tensile, yield, impact strengths, and development of residual stresses play an important role intooling applications. The objective of this paper is to investigate the effect of layer thickness – one of the influential process parameters in stereolithography (SL) process, on mechanical properties of SL components.
Design/methodology/approach
Test specimens are constructed as per the ASTM standards for different layer thicknesses in SL 5000 machine, using epoxy resin CIBA tool ® SL5530, a high temperature resistant SL material that is suitable for rapid tooling applications. Tensile, yield and impact tests are carried out with suitable equipments. Residual stress is analysed using hole drill method.
Findings
The analysis reveals that when the layer thickness is smaller, the strength of the part is higher.
Research limitations/implications
Conclusion of this research is drawn based on the analysis of the most widely used three layer thicknesses of 100, 125 and 150 μm. X‐ray diffraction or molecular resonance analysis may be useful to understand the reason for the variation in mechanical properties.
Originality/value
This experimental study provides the useful information to the SL machine users in the selection of layer thickness to manufacture rapid tools.
Keywords
Citation
Chockalingam, K., Jawahar, N. and Chandrasekhar, U. (2006), "Influence of layer thickness on mechanical properties in stereolithography", Rapid Prototyping Journal, Vol. 12 No. 2, pp. 106-113. https://doi.org/10.1108/13552540610652456
Publisher
:Emerald Group Publishing Limited
Copyright © 2006, Emerald Group Publishing Limited