A smart sensor for compression measurement in automotive textiles
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 22 May 2007
Abstract
Purpose
For size reasons, adapted sensors, able to measure intrinsic mechanical properties of fabrics, have not been developed yet. The study aims at developing a sensor that can be inserted within a specific textile, a “complex” fabric used as seat‐cover fabrics, and consisting of an assembly of three layers.
Design/methodology/approach
Piezoelectric polymer sensors containing polyvinylidene fluoride (PVDF) were chosen. A total of 20 “complex” were studied. A characterisation in compression was achieved, using the Kawabata Evaluation System. The best‐adapted measurement method using a PVDF sensor has been required. The method consists in analyzing the response under compressive stress of a PVDF disc using the resonant frequency of the material. A constraint series is applied to the fabric in the sensor area; the maximal phase at the sensor's resonant frequency is taken up for each one.
Findings
Phase variation is linear and differs according to the studied “complex”. A correlation study between Kawabata compression parameters and slopes did not show any relationship between slope values and compression properties when the surface fabrics of “complex” are compared, but a classification in “families” is possible when different foams are considered.
Research limitations/implications
Further studies should demonstrate whether these “smart” textiles could find applications in the automotive field, to measure accurately the mass of a passenger. The influence of the external parameters (vibrations, temperature variations) has to be checked, knowing that the sensor is not depending on moisture. To complete the study, the sensor has to be tested in a real situation, i.e. inserted in a car‐seat, in contact with a human body.
Originality/value
This study promises development of a sensor that can be inserted into a specific textile, a “complex” fabric used as a seat‐cover, consisting of an assembly of three layers.
Keywords
Citation
Drean, E., Schacher, L., Adolphe, D. and Bauer, F. (2007), "A smart sensor for compression measurement in automotive textiles", International Journal of Clothing Science and Technology, Vol. 19 No. 3/4, pp. 242-252. https://doi.org/10.1108/09556220710741713
Publisher
:Emerald Group Publishing Limited
Copyright © 2007, Emerald Group Publishing Limited