The role of intermetallic compounds in lead‐free soldering

Abstract

The role of intermetallics in soldered joints is ambivalent. They are an essential part of joints to common basis materials and at low levels they have a strengthening effect on solder alloys. At higher levels, however, it is well known that they can cause joint embrittlement. In this paper three aspects of their role have been studied: the microstructure of intermetallic containing solder alloys, the effects of soldering parameters on the quantity of intermetallic formed and, finally, the rates of growth of intermetallic compounds in the solid state. The results suggest that alloys which are pre‐doped with copper tend to form slightly more interfacial intermetallic during soldering than those which are not. In the solid state the rates of growth appear to be a function of the melting point of the alloy, with the higher melting point lead‐free alloys exhibiting lower rates than lower melting point alloys such as 63Sn37Pb (183∞C) or 42Sn58Bi (138∞C).

Citation

Harris, P.G. and Chaggar, K.S. (1998), "The role of intermetallic compounds in lead‐free soldering", Soldering & Surface Mount Technology, Vol. 10 No. 3, pp. 38-52. https://doi.org/10.1108/09540919810237110