Preparation and characterisation of ink formulations for jet printing on nylon carpet
Abstract
Purpose
The purpose of this paper is to prepare and characterise various ink formulations for inkjet printing on nylon 66 carpet.
Design/methodology/approach
Various ink formulations were prepared using CI Acid Red 57, synthetic thickeners (BYK425 and BYK420), ethylene glycol, diethylene glycol, isopropanol with auxiliaries. The inks were characterised for their rheological, wetting and storage stability properties. The inks were jetted using a Printos P16 drop‐on‐demand jet print‐head onto nylon 66 carpet materials. The printed images were characterised using an ImageXpert system.
Findings
It is found that the inks containing the synthetic thickeners at the optimum ratio give good printing and image properties, such as optical density, drop size, and depth of penetration into the substrate at pH 4‐5. The optimised ink formulation is found to have good storage stability.
Research limitations/implications
The study focuses on ink formulations based on CI Acid Red 57. Ink formulations based on other colorants could also be studied in order to assess the applicability of the ink formulation system found for other colorants.
Practical implications
The ink formulations developed could find use in industrial scale printing.
Originality/value
Low cost ink formulations for printing of nylon carpets are novel.
Keywords
Citation
Abd El‐Wahab, H., El‐Molla, M.M. and Lin, L. (2010), "Preparation and characterisation of ink formulations for jet printing on nylon carpet", Pigment & Resin Technology, Vol. 39 No. 3, pp. 163-169. https://doi.org/10.1108/03699421011040794
Publisher
:Emerald Group Publishing Limited
Copyright © 2010, Emerald Group Publishing Limited