Application of an active pneumatic actuator to robotic deburring
Abstract
Purpose
The paper aims to develop a robotic deburring method based on a new active pneumatic tool.
Design/methodology/approach
The paper presents a new active pneumatic tool, which is developed by integrating two industrial pneumatic deburring tools based on a double cutting action – initial cut followed by fine cut. A simple control method is developed, which coordinates the motion of the tools and the arm.
Findings
The study finds that the developed method can improve robotic deburring in terms of speed and accuracy.
Research limitations/implications
The paper provides guidance for the design of a pneumatic deburring tool, its integration with an industrial robot, and robotic deburring control.
Practical implications
The new deburring tool prevents large contact force and bouncing from occurring during the contact transition. In addition, the developed deburring method demonstrates significant improvement in deburring speed and accuracy in comparison with other methods, which is translated into cost‐effective deburring.
Originality/value
The paper introduces an efficient robotic deburring method, which is developed based on a new active pneumatic tool, considers the interaction among the tool, the manipulator, and the workpiece, and couples the tool dynamics and a control design.
Keywords
Citation
Kim, C. and Chung, J.H. (2007), "Application of an active pneumatic actuator to robotic deburring", Industrial Robot, Vol. 34 No. 6, pp. 487-494. https://doi.org/10.1108/01439910710832084
Publisher
:Emerald Group Publishing Limited
Copyright © 2007, Emerald Group Publishing Limited