Search results

A deteriorating security situation and an increased need for defence equipment calls for new forms of collaboration between Armed Forces and the defence industry. This paper aims to investigate the ways in which the accelerating demand for increased security of supply of equipment and supplies to the Armed Forces requires adaptability in the procurement process that is governed by laws on public procurement (PP).

This paper is based on a review of current literature as well as empirical data obtained through interviews with representatives from the Swedish Defence Materiel Administration and the Swedish defence industry.

Collaboration with the globalized defence industry requires new approaches, where the PP rules make procurement of a safe supply of defence equipment difficult.

The study's empirical data and findings are based on the Swedish context. In order to draw more general conclusions in a defence context, the study should be expanded to cover more nations.

The findings will enable the defence industry and the procurement authorizations to better understand the requirements of Armed Forces, and how to cooperate under applicable legal and regulatory requirements.

The paper extends the extant body of academic knowledge of the security of supply into the defence sector. It serves as a first step towards articulating a call for new approaches to collaboration in defence supply chains.

Public and private sector organisations are widely endorsing digital transformation processes, but little is known about the level of digitalisation of an organisation as a whole. The purpose of this paper is to develop a framework to assess an organisation’s level of digital transformation as a whole, taking the field of museums as an exemplary case of application.

The framework draws upon a scoping literature review of studies examining dimensions, metrics and methods for the assessment of the digital transformation of organisations. The framework has been validated by applying it to a sample of 400 Italian museums and further interviews with museum directors.

The authors propose an assessment framework composed of five main dimensions: people, technology, process, customer and strategy and investment. These dimensions are further deployed in sub-dimensions measured through a set of questions. The weighted average of results per dimension and sub-dimension supported the development of a composite index of organisational digital readiness.

The developed framework contributes to the current debate on the measurement of an organisation’s level of digital transformation as a whole, and it can offer practitioners a managerial tool to assess the organisation’s digital readiness.

The aim of this study is to develop an in-depth case study on the implementation on Lean six sigma (LSS) in Schnell S.p.A., Italian company leader of an important multinational industrial group, highlighting the benefits that can be achieved from a careful application of this method, the main challenges and organizational learning from its implementation.

The study has been developed with a qualitative approach, creating a single in-depth case study, with the participant observation of researchers in the project which lasted 4 months. Periodic weekly meetings were done with the working group to exchange feedback on the development of the project to share opinions and data.

A project has been developed to stabilize the procurement process of a pull-type production cell, which experienced delays in supply lead times. The causes of the problems in their process of managing the supply of the production cell were found and some inefficiencies in the internal process of fulfillment of supply orders have been intercepted, the optimization of which has allowed the generation of an automatic system for sending supply orders, coming directly from the production line.

This study described the path and dynamics of the transformation process that business organizations undertake for optimizing their profitability and competitive advantage, placing emphasis on an innovative methodology for conducting business process improvement projects, which constitutes its operating philosophy on the effective and efficient use of company resources and skills, to guarantee to the company the achievement of a lasting and defensible competitive advantage over time.

This paper aims to examine lean thinking in medical commodities supply chains by considering its applications and success factors. It determines the drivers and wastes of medical commodity supply chain, and the existing lean tools and practices together with their application in the supply chain processes. The paper also examined the challenges and success factors for effective lean application in the medical commodities supply chains.

The study used qualitative approaches, in-depth interviews and focus group discussions with key informants to form the basis for data collection. Through thematic analysis, the collected data were analyzed by developing themes reflecting the objectives of the study.

The main drivers for waste associated with the supply chain were demand management, supplier development, institutional framework and governance. The wastes were observed at the level of inventory, operation costs, transaction costs, delays in terms of service, commodity delivery time and quality. Digitalization, information technology and standardization were the tools for medical supply chain. Poor infrastructure, unreliable internet supply, environmental uncertainty and poor management support were challenges to realizing an effective supply chain.

Although the qualitative approach used in the study provides detailed information, a quantitative study covers a larger sample for generalization.

Capacity building and professionalism should be given a priority because the philosophy of lean focuses on waste removal and continuous improvement, which highly depends on the quality of human resource (Brito et al., 2020). Limited human resource capabilities in supply chain management will, therefore, result into poor operational efficiency, which are wasted. Moreover, systems interoperability is key waste minimization and, therefore, demands interventions.

The government under the Ministry of Health and other key sector ministries such as local and regional governments should better understand the role of the waste drivers and adopt system-wide reforms to support improvements to remove waste in the medical supply chain. For example, the current institutional framework creates an administrative block and hence leads to wastes. This bureaucratic procedure should be removed to minimize wastes along the chain.

This study is among the first studies to determine applicability and implementation of lean in a resource-constrained context. The paper identifies contextual factors for lean implementation. This paper focused on a holistic view of the entire supply chains to enhance a well-functioning supply chain in delivering health commodities.

This research aims to examine the complementary impact of Lean Manufacturing (LM) and Green Manufacturing (GM) on operational and environmental performance.

A survey was conducted in the Zimbabwean manufacturing industry. A total of 302 valid responses were obtained and analysed using partial least square structural equation modelling (PLS-SEM).

Both LM and GM impact environmental and operational performance; however, GM's effect on operational performance is indirect through environmental performance.

This study only focusses on the Zimbabwean manufacturing industry, and the results may not readily apply to other developing countries.

The companies that have successfully implemented LM are able to implement GM more easily because of their complementary nature.

The integration of LM and GM reduces most forms of waste, causing an improved environmental and operational performance. In addition, this will improve community relations and customer satisfaction.

This research investigates the complementary nature of LM and GM on how LM and GM impact organisational performance and whether a combined Lean-Green implementation leads to better organisational performance than when LM and GM are implemented individually. The research also examines whether being environmentally compliant leads to improved organisational performance, particularly in a developing country.

The goal of this research is to investigate the relationship between two different sets of practices, lean startup and business planning, and their relation to entrepreneurial performance.

The authors collected data from 120 entrepreneurs across the US about a variety of new venture formation activities within the categories of lean startup or business planning. They use hierarchical regression to examine the relationship between these activities and new venture performance using both a subjective and objective measure of performance.

The results show that talking to customers, collecting preorders and pivoting based on customer feedback are lean startup activities correlated with performance; writing a business plan is the sole business planning activity correlated with performance.

This research lays the foundation for understanding the components of both lean startup and business planning. Moreover, these results demonstrate that the separation of lean startup and business planning represents a false dichotomy.

These findings suggest that entrepreneurs should engage in some lean startup activities and still write a business plan.

This article offers the first quantitative, empirical comparison of lean startup activities and business planning. Furthermore, it provides support for the relationship between specific lean startup activities and firm performance.

The objective of this study is to investigate the barriers hindering the integration of lean manufacturing (LM) practices within the furniture industry of Bangladesh. The traditional operational paradigms in this sector have posed substantial challenges to the effective implementation of LM. In this study, the barriers of implementing LM in the furniture business are examined, aiming to provide a systematic understanding of the barriers that must be addressed for a successful transition.

The research reveals that “Fragmented Industry Structure,” “Resistance to Lean Practices” and “Inadequate Plant Layout and Maintenance”, emerged as the foremost barriers to LM implementation in the furniture industry. Additionally, “Insufficient Expert Management,” “Limited Technical Resources” and “Lack of Capital Investment” play significant roles.

The outcomes of this study provide valuable insights into the furniture industry, enabling the development of strategies for effective LM implementation. One notable challenge in lean implementation is the tendency to revert to established practices when confronted with barriers. Therefore, this transition necessitates informed guidance and leadership. In addition to addressing these internal challenges, the scope of lean implementation should be broadened.

This study represents one of the initial efforts to systematically identify and assess the barriers to LM implementation within the furniture industry of Bangladesh, contributing to the emerging body of knowledge in this area.

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.