Search results

This study aims to evaluate the development of composites made of epoxy (E) resin with different weight percentages of polypropylene (PP) and graphene oxide (Go) to form nanocomposite plates.

A hand lay-up process was used to develop 21 different composites, with varying concentrations of PP (5%–35%) and Go (5%–35%). A ternary composite of E matrix was produced by combining binary fillers PP and Go (5%–35%) in a 1:1 ratio to a (95%–5%) solution. With the help of adopting the melt condensation deal to extract Go, the modified Hummers method was used to make Go platelets.

Through field emission scanning electron microscopy (FESEM) and X-ray diffraction investigations, the particulate’s size and structural characteristics were identified. Based on the FESEM analysis of the collapsed zones of the composites, a warp-and-weft-like structure is evident, which endorses the growth yield strength, flexural modulus and impact strength of the composites.

The developed nanocomposites have exceptional mechanical capabilities compared to plain E resin, with E resin exhibiting better tensile strength, modulus and flexural strength when combined with 10% PP and 10% Go. When compared to neat E resin, materials formed from composites have exceptional mechanical properties. When mixed with 10% PP and 10% Go, E resin in particular displays improved tensile strength (23 MPa), tensile modulus (4.15 GPa), flexural strength (75.6 MPa) and other attributes. Engineering implications include automobile side door panels, spacecraft applications, brake pads and flexible battery guards.

The paper aims to highlight the computational implementation of a nonlinear piezoelectric constitutive model and its application in determining the impact of misalignment between initial poling direction and applied electrical field, and mechanical boundary conditions on actuator performance.

The numerical analysis is based on an existing three‐dimensional model, where the original rate‐independent evolution equations are replaced by their rate‐dependent counterparts to facilitate implementation, which is performed in a partial differential equation solver. The execution of the model is verified through several benchmark constitutive responses.

The analysis shows that small angles of poling and loading axes misalignment such as may occur in fabrication (less than 5^○) have minor impact on piezoelectric performance regardless of the type of imposed mechanical boundary conditions. On the other hand, larger angles of misalignment can have a significant impact, the feasibility of which in actuator design remains to be seen. Furthermore, it is shown that the linear response range of these actuators can be expanded by increased levels of mechanical constraint at the cost of maximum actuation stroke regardless of the degree of misalignment.

The misalignment, which occurs accidentally, but can also be introduced purposefully during the fabrication process when poled material is cut into specimen form, may exhibit desirable performance features for actuator design when combined with appropriate mechanical constraints.