Search results

The combined effects of several complex phenomena cause the deterioration of elements in steel hydraulic structures (SHSs) within the US lock system: corrosion, cracking and fatigue, impact and overloads. Predicting the future condition state of these structures by the use of current condition state inspection data can be achieved through the probabilistic chain deterioration model. The purpose of this study is to derive the transition probability matrix using final elements modeling of a miter gate.

If predicted accurately, this information would yield benefits in determining the need for rehabilitation or replacement of SHS. However, because of the complexity and difficulties on obtaining sufficient inspection data, there is a lack of available condition states needed to formulate proper transition probability matrices for each deterioration case.

This study focuses on using a three-dimensional explicit finite element analysis (FEM) of a miter gate that has been fully validated with experimental data to derive the transition probability matrix when the loss of flexural capacity in a corroded member is simulated.

New methodology using computational mechanics to derive the transition probability matrices of navigation steel structures has been presented.

The difficulty of deriving the transition probability matrix to perform a Markovian analysis increases when limited amount of inspection data is available. The used state of practice FEM to derive the transition probability matrix is not just necessary but also essential when the need for proper maintenance is required but limited amount of the condition of the structural system is unknown.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The coast at Berakas in the Brunei-Muara district of Brunei Darussalam suffers from erosion caused by a combination of fluvial and marine processes. This paper investigates the rate and pattern of erosion along a 1.8-km stretch of coast to compare the difference between the unprotected and protected sections. We used (i) image and spatial analysis and (ii) field geomorphology. The Digital Shoreline Analysis System (DSAS) in ArcGIS was used to compare the study area using two Google Earth images. The study found that the unprotected section had receded by 4.6 m between 2009 and 2019, while the protected section had advanced by 8.0 m over the same period; intense gullying and slumping of cliff continued at both sections. The detached headland breakwaters in the protected section were effective in stabilizing the coast. A concrete drain installed parallel to the cliff edge appears to be capable of intercepting storm runoff, but its effectiveness was undermined by lack of maintenance. We conclude that terrestrial-fluvial processes continue to erode coastal land and cause slumping of the cliff face at Berakas. However, coastal protection structures that curb the marine process could stabilize the coastline, even where sediment transport is active.

Modernisation is characterized by industrial development. The Serasa Industrial Park (SIP) is an industrial estate in Serasa sub-district, close to the Brunei Darussalam's only deep-water port. Given the link between industrial development and environmental degradation, as well as the general lack of environmental monitoring in Brunei, the paper questions whether environmental management (EM) is adequate to protect the area from further industrialisation. The purpose of this paper is to answer this question using SIP as a proxy because it is a well-established industrial site that should be more amenable to EM. This study involves two surveys of 20 firms and an interview with the environmental agency to gain a better understanding on the national policy and strategy. The paper found that, while the current state of EM is structurally weak, it is adequate for the SIP under current conditions. To protect the environment and increase industrialisation in the area, EM structures must be incorporated into existing regulatory frameworks.