Search results

This paper aims to study the impacts of groundwater seepage on artificial freezing process of gravel strata, the temperature field characteristics of the strata, and the strata process, closure time and thickness evolution mechanism of the frozen wall.

In this paper several laboratory model tests were conducted, considering different groundwater seepage rate.

The results show that there is a significant coupling effect between the cold diffusion of artificial freezing pipes and groundwater seepage; when there is no seepage, temperature fields upstream and downstream of the gravel strata are symmetrically distributed, and the thickness of the frozen soil column/frozen wall is consistent during artificial freezing; groundwater seepage causes significant asymmetry in the temperature fields upstream and downstream of the gravel strata, and the greater the seepage rate, the more obvious the asymmetry; the frozen wall closure time increases linearly with the increase in the groundwater seepage rate, and specifically, the time length under seepage rate of 5.00 m d⁻¹ is 3.2 times longer than that under no seepage; due to the erosion from groundwater seepage, the thickness of the upstream frozen wall decreases linearly with the seepage velocity, while that of the downstream frozen wall increases linearly, resulting in a saddle-shaped frozen wall.

The research results are beneficial to the optimum design and risk control of artificial freezing process in gravel strata.

Straightness measurement of rail weld joint is of essential importance to railway maintenance. Due to the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a 5-m wavelength range, leaving a significant knowledge gap in this field.

In this study, the authors used the well-established inertial reference method (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methods have been applied in different types of rail straightness measurement trollies, respectively. These instruments were tested in a high-speed rail section within a certain region of China. The test results were ultimately validated through using traditional straightedge and feeler gauge methods as reference data to evaluate the rail weld joint straightness within the 5-m wavelength range.

The research reveals that IR-method and MCR-method produce reasonably similar measurement results for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy for wavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed, carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.

The research compare two methods’ measurement effects in a longer wavelength range and demonstrate the superiority of MCR-method.