Search results

We revisit the problem of redesigning the Master in Business Administration (MBA) program, curriculum, and pedagogy, focusing on understanding and seeking to tame its “wicked problems,” as an intrinsic part and challenge of the MBA program venture, and to render it more realistic and relevant to address major problems and their consequences. We briefly review the theory of wicked problems and methods of dealing with their consequences from multiple perspectives. Most characterization of problems classifies them as simple (problems that have known formulations and solutions), complex (where formulations are known but not their resolutions), unstructured problems (where formulations are unknown, but solutions are estimated), and “wicked” (where both problem formulations and their resolutions are unknown but eventually partially tamable). Uncertainty, unpredictability, randomness, and ambiguity increase from simple to complex to unstructured to wicked problems. A redesigned MBA program should therefore address them effectively through the four semesters in two years. Most of these problems are real and affect life and economies, and hence, business schools cannot but incorporate them into their critical, ethical, and moral thinking.

Managing project completion within the stipulated time is significant to all firms' sustainability. Especially for software start-up firms, it is of utmost importance. For any schedule variation, these firms must spend 25 to 40 percent of the development cost reworking quality defects. Significantly, the existing literature does not support defect rework opportunities under quality aspects among Indian IT start-ups. The present study aims to fill this niche by proposing a unique mathematical model of the defect rework aligned with the Six Sigma quality approach.

An optimization model was formulated, comprising the two objectives: rework “time” and rework “cost.” A case study was developed in relevance, and for the model solution, we used MATLAB and an elitist, Nondominated Sorting Genetic Algorithm (NSGA-II).

The output of the proposed approach reduced the “time” by 31 percent at a minimum “cost”. The derived “Pareto Optimal” front can be used to estimate the “cost” for a pre-determined rework “time” and vice versa, thus adding value to the existing literature.

This work has deployed a decision tree for defect prediction, but it is often criticized for overfitting. This is one of the limitations of this paper. Apart from this, comparing the predicted defect count with other prediction models hasn’t been attempted. NSGA-II has been applied to solve the optimization problem; however, the optimal results obtained have yet to be compared with other algorithms. Further study is envisaged.

The Pareto front provides an effective visual aid for managers to compare multiple strategies to decide the best possible rework “cost” and “time” for their projects. It is beneficial for cost-sensitive start-ups to estimate the rework “cost” and “time” to negotiate with their customers effectively.

This paper proposes a novel quality management framework under the Six Sigma approach, which integrates optimization of critical metrics. As part of this study, a unique mathematical model of the software defect rework process was developed (combined with the proposed framework) to obtain the optimal solution for the perennial problem of schedule slippage in the rework process of software development.

The purpose of this study is to propose a new mathematical model that integrates strategic decision-making with tactical-operational decision-making in order to optimize production and scheduling decisions.

This study presents a multi-objective optimization framework to make production planning, scheduling and maintenance decisions. An epsilon-constraint method is used to solve small instances of the model, while new hybrid optimization algorithms, including multi-objective particle swarm optimization (MOPSO), non-dominated sorting genetic algorithm, multi-objective harmony search and improved multi-objective harmony search (IMOHS) are developed to address the high complexity of large-scale problems.

The computational results demonstrate that the metaheuristic algorithms are effective in obtaining economic solutions within a reasonable computational time. In particular, the results show that the IMOHS algorithm is able to provide optimal Pareto solutions for the proposed model compared to the other three algorithms.

This study presents a new mathematical model that simultaneously determines green production planning and scheduling decisions by minimizing the sum of the total cost, makespan, lateness and energy consumption criteria. Integrating production and scheduling of a shop floor is critical for achieving optimal operational performance in production planning. To the best of the authors' knowledge, the integration of production planning and maintenance has not been adequately addressed.

This paper aims to explore the optimization process involved in the aircraft maintenance allocation and packing problem. The aircraft industry misses a part of the optimization potential while developing maintenance plans. This research provides the modeling foundation for the missing part considering the failure behavior of components, costs involved with all maintenance tasks and opportunity costs.

The study models the cost-effectiveness of support against the availability to come up with an optimization problem. The mathematical problem was solved with an exact algorithm. Experiments were performed with real field and synthetically generated data, to validate the correctness of the model and its potential to provide more accurate and better engineered maintenance plans.

The solution procedure provided excellent results by enhancing the overall arrangement of the tasks, resulting in higher availability rates and a substantial decrease in total maintenance costs. In terms of situational awareness, it provides the user with the flexibility to better manage resource constraints while still achieving optimal results.

This is an innovative research providing a state-of-the-art mathematical model and an algorithm for efficiently solving a task allocation and packing problem by incorporating components’ due flight time, failure probability, task relationships, smart allocation of common preparation tasks, operational profile and resource limitations.

This study develops a model and algorithm to solve the decentralized resource-constrained multi-project scheduling problem (DRCMPSP) and provides a suitable priority rule (PR) for coordinating global resource conflicts among multiple projects.

This study addresses the DRCMPSP, which respects the information privacy requirements of project agents; that is, there is no single manager centrally in charge of generating multi-project scheduling. Accordingly, a three-stage model was proposed for the decentralized management of multiple projects. To solve this model, a three-stage solution approach with a repeated negotiation mechanism was proposed.

The experimental results obtained using the Multi-Project Scheduling Problem LIBrary confirm that our approach outperforms existing methods, regardless of the average utilization factor (AUF). Comparative analysis revealed that delaying activities in the lower project makespan produces a lower average project delay. Furthermore, the new PR LMS performed better in problem subsets with AUF < 1 and large-scale subsets with AUF > 1.

A solution approach with a repeated-negotiation mechanism suitable for the DRCMPSP and a new PR for coordinating global resource allocation are proposed.

This paper aims to study a neural network-based fault-tolerant controller to improve the tracking control performance of an unmanned autonomous helicopter with system uncertainty, external disturbances and sensor faults, using the prescribed performance method.

To ensure that the tracking error satisfies the prescribed performance, the authors adopt an error transformation function method. A control scheme based on the neural network and high-order disturbance observer is designed to guarantee the boundedness of the closed-loop system. A simulation is performed to prove the validity of the control scheme.

The developed adaptive fault-tolerant control method makes the system with sensor fault realize tracking control. The error transformation function method can effectively handle the prescribed performance requirements. Sensor fault can be regarded as a type of system uncertainty. The uncertainty can be approximated accurately using neural networks. A high-order disturbance observer can effectively suppress compound disturbances.

The tracking performance requirements of unmanned autonomous helicopter system are considered in the design of sensor fault-tolerant control. The inequality constraint that the output tracking error must satisfy is transformed into an unconstrained problem by introducing an error transformation function. The fault state of the velocity sensor is considered as the system uncertainty, and a neural network is used to approach the total uncertainty. Neural network estimation errors and external disturbances are treated as compound disturbances, and a high-order disturbance observer is constructed to compensate for them.

The purpose of this paper is to conduct a systematic literature review of research conducted in the economic Islamicity (EI) index field, in terms of non-Islamic countries.

This study thoroughly assessed the literature on the EI index by conducting extensive systematic literature reviews.

The critical analysis of these indices shows the need for amendments, which can be achieved by improving the Islamicity index seen in non-Islamic countries. This step will help validate the Islamicity index assessment and help Islamic countries develop and strengthen Islamic economic values.

As the first comprehensive literature review in the Islamicity indices domain to the best of the authors’ knowledge, this research may contribute for Islamic country to increase the Islamicity index in terms of economic issue for future research themes.

Proper platform pose is important for the mobile manipulator to accomplish dexterous manipulation tasks efficiently and safely, and the evaluation criterion to qualify manipulation performance is critical to support the pose decision process. This paper aims to present a comprehensive index to evaluate the manipulator’s operation performance from various aspects.

In this research, a criterion called hybrid manipulability (HM) is proposed to assess the performance of the manipulator’s operation, considering crucial factors such as joint limits, obstacle avoidance and stability. The determination of the optimal platform pose is achieved by selecting the pose that maximizes the HM within the feasible inverse reachability map associated with the target object.

A self-built mobile manipulator is adopted as the experimental platform, and the feasibility of the proposed method is experimentally verified in the context of object-grasping tasks both in simulation and practice.

The proposed HM extends upon the conventional notion of manipulability by incorporating additional factors, including the manipulator’s joint limits, the obstacle avoidance situation during the operation and the manipulation stability when grasping the target object. The manipulator can achieve enhanced stability during grasping when positioned in the pose determined by the HM.

The purpose of this study is to formulate a governance and regulatory framework for Islamic crypto assets (ICAs). A balanced regulatory framework is required to protect consumers and to encourage digital Islamic finance innovation.

This study focuses on Indonesia and compares it to other countries, specifically Malaysia and the UK, using statutory, comparative and conceptual research approaches.

The ICAs are permissible (halal) commodities/assets to be traded if they fulfil the standards as goods or commodities that can be traded with a sale and purchase contract (sil’ah) and have an underlying asset (backed by tangible assets such as gold). Islamic social finance activities such as zakat and Islamic microfinance activities such as halal industry are backed by ICAs. The regulatory framework needed to support ICAs includes the Islamic Financial Services Act, shariah supervisory boards, shariah governance standards and ICA exchanges.

This study only examined crypto assets (tokens as securities) and not cryptocurrencies. It used regulations in several countries with potential in Islamic finance development, such as Indonesia, Malaysia and the UK.

The ICA regulatory framework is helpful as an element of a comprehensive strategy to develop a lasting Islamic social finance ecosystem.

The development of crypto assets must be supported by a regulatory framework to protect consumers and encourage innovation in Islamic digital finance.

ICA has growth prospects; however, weak regulatory support and minimal oversight indicate weak legal protection for consumers and investors. Regulating ICA, optimising supervision, implementing shariah governance standards and having ICA exchanges can strengthen the Islamic economic ecosystem.

Managers must make numerous strategic decisions in order to initiate and implement a business model innovation (BMI). This paper examines how managers perceive the management team interacts when making BMI decisions. The paper also investigates how group biases and board members’ risk willingness affect this process.

Empirical data were collected through 26 in-depth interviews with German managing directors from 13 companies in four industries (mobility, manufacturing, healthcare and energy) to explore three research questions: (1) What group effects are prevalent in BMI group decision-making? (2) What are the key characteristics of BMI group decisions? And (3) what are the potential relationships between BMI group decision-making and managers' risk willingness? A thematic analysis based on Gioia's guidelines was conducted to identify themes in the comprehensive dataset.

First, the results show four typical group biases in BMI group decisions: Groupthink, social influence, hidden profile and group polarization. Findings show that the hidden profile paradigm and groupthink theory are essential in the context of BMI decisions. Second, we developed a BMI decision matrix, including the following key characteristics of BMI group decision-making managerial cohesion, conflict readiness and information- and emotion-based decision behavior. Third, in contrast to previous literature, we found that individual risk aversion can improve the quality of BMI decisions.

This paper provides managers with an opportunity to become aware of group biases that may impede their strategic BMI decisions. Specifically, it points out that managers should consider the key cognitive constraints due to their interactions when making BMI decisions. This work also highlights the importance of risk-averse decision-makers on boards.

This qualitative study contributes to the literature on decision-making by revealing key cognitive group biases in strategic decision-making. This study also enriches the behavioral science research stream of the BMI literature by attributing a critical influence on the quality of BMI decisions to managers' group interactions. In addition, this article provides new perspectives on managers' risk aversion in strategic decision-making.