Search results
1 – 7 of 7Kartik Venkatraman, Stéphane Moreau, Julien Christophe and Christophe Schram
The purpose of the paper is to predict the aerodynamic performance of a complete scale model H-Darrieus vertical axis wind turbine (VAWT) with end plates at different operating…
Abstract
Purpose
The purpose of the paper is to predict the aerodynamic performance of a complete scale model H-Darrieus vertical axis wind turbine (VAWT) with end plates at different operating conditions. This paper aims at understanding the flow physics around a model VAWT for three different tip speed ratios corresponding to three different flow regimes.
Design/methodology/approach
This study achieves a first three-dimensional hybrid lattice Boltzmann method/very large eddy simulation (LBM-VLES) model for a complete scaled model VAWT with end plates and mast using the solver PowerFLOW. The power curve predicted from the numerical simulations is compared with the experimental data collected at Erlangen University. This study highlights the complexity of the turbulent flow features that are seen at three different operational regimes of the turbine using instantaneous flow structures, mean velocity, pressure iso-contours, blade loading and skin friction plots.
Findings
The power curve predicted using the LBM-VLES approach and setup provides a good overall match with the experimental power curve, with the peak and drop after the operational point being captured. Variable turbulent flow structures are seen over the azimuthal revolution that depends on the tip speed ratio (TSR). Significant dynamic stall structures are seen in the upwind phase and at the end of the downwind phase of rotation in the deep stall regime. Strong blade wake interactions and turbulent flow structures are seen inside the rotor at higher TSRs.
Research limitations/implications
The computational cost and time for such high-fidelity simulations using the LBM-VLES remains expensive. Each simulation requires around a week using supercomputing facilities. Further studies need to be performed to improve analytical VAWT models using inputs/calibration from high fidelity simulation databases. As a future work, the impact of turbulent and nonuniform inflow conditions that are more representative of a typical urban environment also needs to be investigated.
Practical implications
The LBM methodology is shown to be a reliable approach for VAWT power prediction. Dynamic stall and blade wake interactions reduce the aerodynamic performance of a VAWT. An ideal operation close to the peak of the power curve should be favored based on the local wind resource, as this point exhibits a smoother variation of forces improving operational performance. The 3D flow features also exhibit a significant wake asymmetry that could impact the optimal layout of VAWT clusters to increase their power density. The present work also highlights the importance of 3D simulations of the complete model including the support structures such as end plates and mast.
Social implications
Accurate predictions of power performance for Darrieus VAWTs could help in better siting of wind turbines thus improving return of investment and reducing levelized cost of energy. It could promote the development of onsite electricity generation, especially for industrial sites/urban areas and renew interest for VAWT wind farms.
Originality/value
A first high-fidelity simulation of a complete VAWT with end plates and supporting structures has been performed using the LBM approach and compared with experimental data. The 3D flow physics has been analyzed at different operating regimes of the turbine. These physical insights and prediction capabilities of this approach could be useful for commercial VAWT manufacturers.
Details
Keywords
Noha M. El-Bassiouny, Wafa El Garah, Hadeer Hammad and Marina Schmitz
Stuart Capstick, Sarah Hemstock and Ruci Senikula
This study aims to investigate the role of the visual arts for communicating climate change in the context of the Pacific islands, through the perspectives of artists and climate…
Abstract
Purpose
This study aims to investigate the role of the visual arts for communicating climate change in the context of the Pacific islands, through the perspectives of artists and climate change practitioners.
Design/methodology/approach
As part of an “Eco Arts” project carried out in Fiji, semi-structured research interviews were undertaken with artists and climate change practitioners.
Findings
Participants’ motivations to produce art reflected their personal concerns about, and experiences of, climate change. There was an intention to use art-based approaches to raise awareness and promote action on climate change. The artwork produced drew on metaphors and storytelling to convey future climate impacts and aspects of climate change relevant to Fijian and Pacific communities.
Research limitations/implications
The study reports the perspectives of participants and discusses the potential uses of arts communication. Conclusions cannot be drawn from the findings regarding the effectiveness of specific artwork or of arts communication as a general approach.
Practical implications
The research offers suggestions for the inclusion of creative approaches to climate change communication within education and vocational training. A consideration of the perspectives of artist–practitioners has implications for the design and conduct of climate change communication.
Social implications
The involvement of artist–practitioners in the communication of climate change offers the potential for novel discussions and interpretations of climate change with individuals and within communities, which complement more formal or scientific communication.
Originality/value
The present study identifies the motivations and objectives of artist–practitioners involved in climate change communication. The authors highlight the role of personal experience and their use of artistic concepts and creative considerations pertinent to the geography and culture of the Pacific region.
Details
Keywords
David Bricín, Filip Véle, Zdeněk Jansa, Zbyněk Špirit, Jakub Kotous and Dana Kubátová
The purpose of this study is to verify how the carbon doping of the WC-Co cemented carbide (CC) affected their structure before their processing by hot isostatic pressing (HIP…
Abstract
Purpose
The purpose of this study is to verify how the carbon doping of the WC-Co cemented carbide (CC) affected their structure before their processing by hot isostatic pressing (HIP) technology.
Design/methodology/approach
The samples for this experiment were fabricated by selective laser melting technology (SLM) using a YAG fiber laser with a power of P = 40 W and a scanning speed of 83 mm/s. The subsequent carbon doping process was performed in a chamber furnace at 900 0 C for 1, 4 and 12 h. The HIP was performed at 1,390°C and pressures of 40 MPa, 80 MPa and 120 MPa. The changes induced in the structures were evaluated using X-ray diffraction and various microscopic methods.
Findings
X-ray diffraction analysis showed that the structure of the samples after SLM consisted of WC, W2C, Co4W2C and Co phases. As a result of the increase in the carbon content in the structure of the samples, the transition carbide W2C and structural phase Co4W2C decayed. Their decay was manifested by the coarsening of the minor alpha phase (WC), which occurred both during the carburizing process and during the subsequent processing using HIP. In the samples in which the structure was carburized prior to HIP, only the structural phases WC and Co were observed in most cases.
Originality/value
The results confirm that it is possible to increase the homogeneity of the CC structure and thus its applicability in practice by additional carburization of the sample structure with subsequent processing by HIP technology.
Details