Search results

This paper aims to describe a proposal for an innovative method of normal shock wave–turbulent boundary layer interaction (SBLI) and shock-induced separation control.

The concept is based on the introduction of a tangentially moving wall upstream of the shock wave and in the interaction region. The SBLI control mechanism may be implemented as a closed belt floating on an air cushion, sliding over two cylinders and forming the outer skin of the suction side of the airfoil. The presented exploratory numerical study is conducted with SPARC solver (steady 2D RANS). The effect of the moving wall is presented for the NACA 0012 airfoil operating in transonic conditions.

To assess the accuracy of obtained solutions, validation of the computational model is demonstrated against the experimental data of Harris, Ladson & Hill and Mineck & Hartwich (NASA Langley). The comparison is conducted not only for the reference (impermeable) but also for the perforated (permeable) surface NACA 0012 airfoils. Subsequent numerical analysis of SBLI control by moving wall confirms that for the selected velocity ratios, the method is able to improve the shock-upstream boundary layer and counteract flow separation, significantly increasing the airfoil aerodynamic performance.

The moving wall concept as a means of normal shock wave–turbulent boundary layer interaction and shock-induced separation control has been investigated in detail for the first time. The study quantified the necessary operational requirements of such a system and practicable aerodynamic efficiency gains and simultaneously revealed the considerable potential of this promising idea, stimulating a new direction for future investigations regarding SBLI control.

The purpose of this paper is to investigate and compare the effects of rod and vane-type vortex generators for wind turbine applications. In large wind turbine rotors, an attached flow at all sections along the span direction is difficult to achieve which leads to an increase in aerodynamic losses, noise generation, and fatigue stress. Therefore, flow control strategies such as vortex generators (VGs) are beneficial to improve performance.

The benefits of the application of rod-type vortex generators (RVGs) to control flow separation on a wind turbine airfoil are assessed numerically using computational fluid dynamics (CFD). The validation of the computational model is conducted against the experimental data available for the DU96-W-180 wind turbine airfoil equipped with 44 RVGs. In addition, a revised wind tunnel angle of attack (AoA) calibration procedure (based on CFD) is proposed that is applicable for separated flows. A comparison of the RVGs to the conventional vane-type vortex generators (VVGs) is presented for inflow velocity of 30 m/s and AoA leading to significant flow separation. A parametric evaluation of the geometric characteristics of both types of VGs is conducted to quantify the generated streamwise vortices.

The comparison of the induced flow structures and aerodynamic efficiency enhancements proves that RVGs may be used as an alternative to the more conventional VVGs applied on wind turbine blades for boundary layer separation control.

A new type of VG (rod) has been investigated and compared against conventional VG (vanes) for wind turbine applications.

Helicopter rotor blades are usually aerodynamically limited by the severe conditions present in every revolution: strong shock wave boundary layer interaction on the advancing side and dynamic stall on the retreating side. Therefore, different flow control strategies might be applied to improve the aerodynamic performance.

The present research is focussed on the application of passive rod vortex generators (RVGs) to control the flow separation induced by strong shock waves on helicopter rotor blades. The formation and development in time of the streamwise vortices are also investigated for a channel flow.

The proposed RVGs are able to generate streamwise vortices as strong as the well-known air-jet vortex generators. It has been demonstrated a faster vortex formation for the rod type. Therefore, this flow control device is preferred for applications in which a quick vortex formation is required. Besides, RVGs were implemented on helicopters rotor blades improving their aerodynamic performance (ratio thrust/power consumption).

A new type of vortex generator (rod) has been investigated in several configurations (channel flow and rotor blades).