Search results

This article introduces the Special Issue on Sustainable Management of Heritage Buildings in long-term perspective.

It starts by reviewing the gaps in knowledge and practice which led to the creation and implementation of the research project SyMBoL—Sustainable Management of Heritage Buildings in long-term perspective funded by the Norwegian Research Council over the 2018–2022 period. The SyMBoL project is the motivation at the base of this special issue.

The editorial paper briefly presents the main outcomes of SyMBoL. It then reviews the contributions to the Special Issue, focussing on the connection or differentiation with SyMBoL and on multidisciplinary findings that address some of the initial referred gaps.

The article shortly summarizes topics related to sustainable preservation of heritage buildings in time of reduced resources, energy crisis and impacts of natural hazards and global warming. Finally, it highlights future research directions targeted to overcome, or partially mitigate, the above-mentioned challenges, for example, taking advantage of no sestructive techniques interoperability, heritage building information modelling and digital twin models, and machine learning and risk assessment algorithms.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This study aims to address the noted gap in comprehensive overviews detailing the developmental trajectory of Islamic finance (IF) as an interdisciplinary academic field.

The study introduces a unique approach using the combined methodologies of co-word analysis and main path analysis (MPA) by examining a broad collection of IF research articles.

The investigation identifies dominant themes and foundational works that have influenced the IF discipline. The data reveals prominent areas such as Shariah governance, financial resilience, ethical dimensions and customer-centric frameworks. The MPA offers detailed insights, narrating a journey from the foundational principles of IF to its current challenges and opportunities. This journey covers harmonizing religious beliefs with contemporary financial models, changes in regulatory landscapes and the continuous effort to align with broader socioeconomic aspirations. Emerging areas of interest include using new technologies in IF, standardizing global Islamic banking and assessing its socioeconomic effects on broader populations.

This study represents a pioneering effort to map out and deepen the understanding of the IF field, highlighting its dynamic evolution and suggesting potential avenues for future academic exploration.

This research study aims to identify barriers to incorporating forensic accounting into accounting curricula in Jordanian universities. The study examines the differences in perspectives among various accounting education stakeholders, including students, educators and accounting and auditing employees/managers, on forensic accounting education.

The research methodology is quantitative and involves administering a survey questionnaire. The data obtained are analyzed using techniques including t-test analysis, one-way ANOVA and post-hoc.

The study reveals that educators have a more favorable view toward incorporating forensic accounting into university accounting curricula in Jordan, while accountants and auditors (employees/managers) are more strongly convinced of its importance. Furthermore, the biggest challenge to integrating forensic accounting, as perceived by stakeholders, is the lack of related job opportunities.

The study significantly contributes to accounting education research by providing valuable information on barriers to incorporating forensic accounting into the accounting curricula of Jordanian educational institutions from the perceptive of various stakeholders. Therefore, this study may assist educators in overcoming obstacles in offering forensic accounting education.

The study carries important implications for the inclusion of forensic accounting in the accounting curricula of Jordanian educational institutions. By comprehending the different viewpoints of various stakeholders, educators and policymakers can address recognized challenges and strive for the effective integration of forensic accounting in accounting curricula. As a result, accounting students will receive a more comprehensive education, and graduates will be better equipped for successful careers in the field.

The purpose of this study is to examine the state of research into adoption of machine learning systems within the health sector, to identify themes that have been studied and observe the important gaps in the literature that can inform a research agenda going forward.

A systematic literature strategy was utilized to identify and analyze scientific papers between 2012 and 2022. A total of 28 articles were identified and reviewed.

The outcomes reveal that while advances in machine learning have the potential to improve service access and delivery, there have been sporadic growth of literature in this area which is perhaps surprising given the immense potential of machine learning within the health sector. The findings further reveal that themes such as recordkeeping, drugs development and streamlining of treatment have primarily been focused on by the majority of authors in this area.

The search was limited to journal articles published in English, resulting in the exclusion of studies disseminated through alternative channels, such as conferences, and those published in languages other than English. Considering that scholars in developing nations may encounter less difficulty in disseminating their work through alternative channels and that numerous emerging nations employ languages other than English, it is plausible that certain research has been overlooked in the present investigation.

This review provides insights into future research avenues for theory, content and context on adoption of machine learning within the health sector.

This study examines the theoretical and empirical relationships between LM&SS, human resource management (HRM), climate for LM&SS and outcomes (employee well-being and performance) in hospitals. As part of this research, the authors examine the interplay between “hard” and “soft” practices for LM&SS and “soft” HR practices.

A cross-sectional, multisite survey study covering all internal service units at all eight Dutch university hospitals was conducted (42 units, N = 218 supervisors, N = 1,668 employees), and multivariate multilevel regression analyses were performed.

A systems approach involving “soft” LM&SS practices that are specifically HR-related has a positive effect (β is 0.46) on a climate for LM&SS. A climate for LM&SS is not related to perceived performance or employee health. It is, however, positively related to employee happiness and trusting relationships (both βs are 0.33). We did not find that a climate for LM&SS had a mediating effect.

This study shows that a balanced approach involving both “hard” and “soft” factors is crucial to achieving the desired breadth and depth of LM&SS adoption at the macro, meso, and micro levels. The authors found that a climate for LM&SS positively affects employee well-being in hospitals.

In their attempt to create mutual gains for both their organization and their employees, hospitals that adopt LM&SS should foster a climate for LM&SS by embracing a balanced approach consisting of both “hard” and “soft” practices, thereby internalizing LM&SS at the macro, meso, and micro levels.

This is one of the first studies to examine in-depth the impact of “hard” and “soft” LM&SS on both employee well-being (subdivided into different components) and performance in healthcare, as well as the role of “soft” HRM in this relationship. Linking LM&SS, HRM and outcomes to a climate for LM&SS is relatively a new approach and has led to a deeper understanding of the mechanisms underpinning the internalization of LM&SS in healthcare.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

Bipolar and depression disorders are some of the most common mental health disorders affecting millions of people in low-and middle-income countries, including those in Africa. These disorders are therefore major contributors to the burden of diseases and disability. While an enhancement in income is seen as a major approach towards reducing the burden of these disorders, empirical evidence to support this view in the African context is lacking. This study therefore aims to examine the effect of per capita income growth on bipolar and depression disorders across African countries.

The study uses data from secondary sources comprising 42 African countries over the period, 2002–2019, to achieve its objective. The prevalence of bipolar and major depressive disorders (depression) are used as the dependent variables, while per capita income growth is used as the main independent variable. The system Generalised Method of Moments regression is used as the estimation technique.

In the baseline, the authors find per capita income growth to be associated with a reduction in the prevalence of bipolar (coefficient: −0.001, p < 0.01) and depression (coefficient: −0.001, p < 0.1) in the short-term. Similarly, in the long-term, per capita income growth is found to have negative association with the prevalence of bipolar (coefficient: −0.059, p < 0.01) and depression (coefficient: −0.035, p < 0.1). The results are similar after robustness checks.

This study attempts at providing the first empirical evidence of the effect of per capita income growth on bipolar and depression disorders across several African countries.

The study seeks to understand what teachers know about students’ friend networks and how they use that information for instruction.

This qualitative study relied on interviews and sociograms that teachers drew of students’ friend networks.

Our data suggest that teachers’ awareness of their students’ friend networks varies by their experience and their exposure to students. Also, their use of this information for instruction coalesces around dimensions of grouping and social support.

This study took place at one school. To more deeply understand what teachers perceive about their students’ friend networks and how they use that information for instruction, more studies could be done with teachers in more schools.

Implications might suggest developing teachers’ social competence to support their students’ learning and development.

While studies cited in this paper have explored teachers’ knowledge of students’ social networks, this study builds on this work by exploring how that information can be useful for instruction. In addition, this study explores the use of teachers drawing sociograms as representations of what they know about students’ friend networks.