Search results

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

The maritime freight transportation industry has played an important role in the Korean economy. The Korean maritime freight transportation industry is faced with a period of transforming it competitively and efficiently in this global age. This paper, therefore, aims to identify the impact of the maritime freight transportation industry in the Korean national economy. Hence, this paper provides policy-makers with accessible and reliable information regarding the role of the Korean maritime freight transportation industry. This study employs input-output (I-O) analysis to examine the role of the maritime freight transportation industry in the national economy for the period 1995-2003, with specific application to Korea. This study pays particular attention to the maritime freight transportation industry by taking the industry as exogenous variable and then investigates its economic impacts. We identify inter-industry linkage effects in 20 sectors, production-inducing effects, added value-inducing effects, and supply-shortage effects of the maritime freight transportation industry.

The main goal of this paper is to examine the evolution of Latin American productive integration in terms of the regional value added incorporated in intra-regional exports of Argentina, Brazil, Chile, Colombia, Mexico and Peru. In addition, the study traces the trade and productive integration trajectories for each of these countries from 1995 to 2015.

Based on the use of OECD’s global ICIO input-output tables, this paper applies the methodological framework by Wang et al. (2018) for the analysis of trade flows at the bilateral level, which allows breaking down the value of gross exports of each sector-country, depending on the origin of the value added contained in exports, as well as their use.

The estimates show very low shares of value added from regional partners in the intra-regional exports of the countries studied. Conversely, the weight of the value added incorporated in these exports by countries outside the region has increased in tandem with China’s expanding involvement in Latin America. This development, along with the downward trend in domestic value added incorporated in exports, indicates a lack of a regional integration process of any depth.

This article addresses an economic problem of conventional importance from a global value chain perspective using a novel methodology based on the use of global input–output tables.

Understanding China's carbon dioxide (CO2) emission status is crucial for getting Carbon Neutrality status. The purpose of the paper is to calculate two possible scenarios for CO2 emission distribution and calculated input-output flows of CO2 emissions for every 31 China provinces for 2012, 2015 and 2017 years.

In this study using the input and output (IO) table's data for the selected years, the authors found the volume of CO2 emissions per one Yuan of revenue for the industry in 2012 and the coefficient of emission reduction compared to 2012.

Results show that in the industries with a huge volume of CO2 emissions, such as “Mining and washing of coal”, the authors cannot observe the reduction processes for years. Industries where emissions are being reduced are “Processing of petroleum, coking, nuclear fuel”, “Production and distribution of electric power and heat power”, “Agriculture, Forestry, Animal Husbandry and Fishery”. For the “construction” industry the situation with emissions did not change.

“Transport, storage, and postal services” and “Smelting and processing of metals” industries in China has the second place concerning emissions, but over the past period, emissions have been sufficiently reduced. “Construction” industry produces a lot of emissions, but this industry does not carry products characterized by large emissions from other industries. Authors can observe that Jiangsu produces a lot of CO2 emissions, but they do not take products characterized by significant emissions from other provinces. Shandong produces a lot of emissions and consumes many of products characterized by large emissions from other provinces. However, Shandong showed a reduction in CO2 emissions from 2012 to 2017.

The aim of this study is to provide energy supply chain in Indonesia. Therefore, the best scenario has been created to fulfill energy scarcity by global supply chain partnership. All impact social-economy will be advantages. The input output analysis has been applied in this paper. The impact of output and impact of job creation are possible to describe, significantly. All barriers and opportunities that can be achieve from the lowest price, efficiency and also to reduce unemployment rate during a decade of building nuclear power plants. This research work can be applicable model for future nuclear power plants construction or other type of energy source construction that give significant impact to the economy and business sustainability. Therefore, by this project plan will cover energy needs for domestics and improve the local corporate productivity, especially for nuclear power plants equipment.

The emerging disintegrative processes of transitional economies are influencing companies’ business models in terms of consumer behaviour, especially food markets, which offer usual, common and traditional consumer products. Beyond investigating potential consumer misbehaviour, a further aim of this study is the building of a theoretical-descriptive model for consumer misbehaviour in food markets, which could influence the contextual complexity in business relationships, as well as the management of raw materials, services acquisition and final product sales. The research applies the “input-output” model (Ferrero, 1968) to some specific marketing theories, adopting an interdisciplinary approach for understanding the relationships between consumer behaviour and a company’s business model.

The research is both qualitative and quantitative in nature. In the first phase, the research was conducted among representatives of grocery stores using an exploratory approach; thus, an in-depth interview method was used. In the second phase, direct research among consumers was conducted using an online survey. After the verification of correctness, validity and reliability, a final 1,200-questionnaire dataset was analysed

The most common consumer misbehaviour in food markets concerns the theft of foodstuff or the adoption of bad behaviour towards grocery stores employees. Market and store representatives have highlighted a large scale of pathological consumer misbehaviour, mostly due to psychological conditions at the individual (habits, lifestyle or personality) and collective (family or other social groups) levels. According to previous studies, consumer misbehaviour in food markets seems to be substantially affected by three factors: motivation, capacity and opportunity. These factors strongly impact the input-output model through which the company interacts with the context.

The three-factor model reveals advantages and applications, allowing for a simple explanation of consumer misbehaviour in food markets and stores. It can contribute to scientific theory development (especially theories related to consumer behaviour, customer relationship management, partnership marketing and supply chain management) and generate support for understanding complex relations among consumers, food producers, factories and food stores. In this direction, the management of knowledge about consumers and their behaviour is indispensable.

This paper applies the decomposition method proposed by Wang et al. (2013), together with the multi-national input-output tables from World Input-Output Database (WIOD) to estimate the value-chain transition in East Asian production network. Specifically, we calculate and examine the domestic value-added absorbed abroad, foreign value-added embodied in country’s gross exports, and vertical specialization measures to explore the relative positions of major East Asian countries in the global production chain over the period of 1995-2011. The analyses are at country-aggregate, country-sector, bilateral-aggregate and bilateral-sector levels. Based on our results, we answer the important question of whether Taiwan and South Korea have used China’s production chains as an intermediary to re-export their products to other countries in the world. Furthermore, we answer the question that over the 1995-2011 periods, have Taiwan and South Korea exploited cheap labor from China to add value to their products before re-exported them to the rest of the world?

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

This study analyzed Korea's relations table through network analysis. In particular, among the centralities, eigenvector centrality, PageRank centrality and degree were used. The author studied which network characteristics affected the value-added rate.

A network analysis method was used.

It is the inward relationship that affects the value-added ratio of Korea's industries and the outward relationship has less influence. In particular, the inward relationship not only acts as a cost but also has an effect on the rate of added value recently.

Since the three years of 2010, 2015 and 2019 are the target, the data are somewhat insufficient to generalize.

As for the value-added ratio of an industry, input is more important than output (sales). Therefore, where the input is received is very important.

It is possible to increase the understanding of the determinants of the value-added rate of Korean industries.

(1) It was clarified which side is inward or outward in determining the industry in Korea. (2) The relationship between PageRank, eigenvector centrality and degree was analyzed in Korean cases. (3) Input is a cost and acts to increase added value.

In the current literature, there is little systematic research on the relationship among adjustment of the income distribution, change in economic structure and improvement of macroeconomic efficiency.

This paper expands Marx's reproduction schema into the “Marx–Sraffa” three-department structure table comprising fixed capital, general means of production and means of consumption and employs China's input–output table from 1987 to 2015 to portray the relationship between income distribution and macroeconomic efficiency under investment-driven growth.

This paper calculates the wage–profit curve of China's economy and evaluates the space of macroeconomic efficiency improvement in China based on the deviation between actual and potential income distribution structure.

The results show that there is a downward trend of the profit rate, which meets Marx's theoretical prediction, and the decline in the profit rate is mainly attributed to an increase in the organic composition of capital arising from the rapid growth of fixed capital investment under extended growth. The analysis of macroeconomic efficiency shows that the space for improving macroeconomic efficiency is extremely limited under traditional growth pattern and that China must transform its economic development pattern and foster new economic growth drivers.