Search results

Fixed mode noise and random mode noise always exist in the image sensor, which affects the imaging quality of the image sensor. The charge diffusion and color mixing between pixels in the photoelectric conversion process belong to fixed mode noise. This study aims to improve the image sensor imaging quality by processing the fixed mode noise.

Through an iterative training of an ergoable long- and short-term memory recurrent neural network model, the authors obtain a neural network model able to compensate for image noise crosstalk. To overcome the lack of differences in the same color pixels on each template of the image sensor under flat-field light, the data before and after compensation were used as a new data set to further train the neural network iteratively.

The comparison of the images compensated by the two sets of neural network models shows that the gray value distribution is more concentrated and uniform. The middle and high frequency components in the spatial spectrum are all increased, indicating that the compensated image edges change faster and are more detailed (Hinton and Salakhutdinov, 2006; LeCun et al., 1998; Mohanty et al., 2016; Zang et al., 2023).

In this paper, the authors use the iterative learning color image pixel crosstalk compensation method to effectively alleviate the incomplete color mixing problem caused by the insufficient filter rate and the electric crosstalk problem caused by the lateral diffusion of the optical charge caused by the adjacent pixel potential trap.

This study proposes a predictive neural network model reference decoupling control method for the coupling problem between the leg joints of hydraulic quadruped robots, and verifies its decoupling effect..

The machine–hydraulic cross-linking coupling is studied as the coupling behavior of the hydraulically driven quadruped robot, and the mechanical dynamics coupling force of the robot system is controlled as the disturbance force of the hydraulic system through the Jacobian matrix transformation. According to the principle of multivariable decoupling, a prediction-based neural network model reference decoupling control method is proposed; each module of the control algorithm is designed one by one, and the stability of the system is analyzed by the Lyapunov stability theorem.

The simulation and experimental research on the robot joint decoupling control method is carried out, and the prediction-based neural network model reference decoupling control method is compared with the decoupling control method without any decoupling control method. The results show that taking the coupling effect experiment between the hip joint and knee joint as an example, after using the predictive neural network model reference decoupling control method, the phase lag of the hip joint response line was reduced from 20.3° to 14.8°, the amplitude attenuation was reduced from 1.82% to 0.21%, the maximum error of the knee joint coupling line was reduced from 0.67 mm to 0.16 mm and the coupling effect between the hip joint and knee joint was reduced from 1.9% to 0.48%, achieving good decoupling.

The prediction-based neural network model reference decoupling control method proposed in this paper can use the neural network model to predict the next output of the system according to the input and output. Finally, the weights of the neural network are corrected online according to the predicted output and the given reference output, so that the optimization index of the neural network decoupling controller is extremely small, and the purpose of decoupling control is achieved.