Search results
1 – 10 of over 1000Yi Xie and Baojin Zheng
This paper aims to apply the novel numerical model to analyze the effect of pillar material on the response of compound quartz crystal resonator (QCR) with an array of pillars…
Abstract
Purpose
This paper aims to apply the novel numerical model to analyze the effect of pillar material on the response of compound quartz crystal resonator (QCR) with an array of pillars. The performance of the proposed device compared to conventional QCR method was also investigated.
Design/methodology/approach
A finite element method model was developed to analyze the behavior of QCR coupled with an array of pillars. The model was composed of an elastic pillar, a solution and a perfectly matched layer. The validation of the model was performed through a comparison between its predictions and previous experimental measurements. Notably, a good agreement was observed between the predicted results and the experimental data.
Findings
The effect of pillar Young’s modulus on the coupled QCR and pillars with a diameter of 20 µm, a center-to-center spacing of 40 µm and a density of 2,500 kg/m3 was investigated. The results indicate that multiple vibration modes can be obtained based on Young’s modulus. Notably, in the case of the QCR–pillar in air, the second vibration mode occurred at a critical Young’s modulus of 0.2 MPa, whereas the first mode was observed at 3.75 Mpa. The vibration phase analysis revealed phase-veering behavior at the critical Young’s modulus, which resulted in a sudden jump-and-drop frequency shift. In addition, the results show that the critical Young’s modulus is dependent on the surrounding environment of the pillar. For instance, the critical Young’s modulus for the first mode of the pillar is approximately 3.75 Mpa in air, whereas it increases to 6.5 Mpa in water.
Originality/value
It was concluded that the performance of coupled QCR–pillar devices significantly depends on the pillar material. Therefore, choosing pillar material at critical Young’s modulus can lead to the maximum frequency shift of coupled QCR–pillar devices. The model developed in this work helps the researchers design pillars to achieve maximum frequency shift in their measurements using coupled QCR–pillar.
Details
Keywords
This study aims to investigate the individual electrochemical transients arising from local anodic events on stainless steel, to uncover the potential mechanisms producing…
Abstract
Purpose
This study aims to investigate the individual electrochemical transients arising from local anodic events on stainless steel, to uncover the potential mechanisms producing different types of transients and to derive appropriate parameters indicative of the corrosion severity of such transient events.
Design/methodology/approach
An equivalent circuit model was used for the transient analysis, which was performed using a local current allocation rule based on the relative instant cathodic resistance of the coupled electrodes, as well as the kinetic parameters derived from the electrochemical polarization measurement.
Findings
The shape and size of the electrochemical current transients arising from SS 316 L were influenced by the film stability, local anodic dissolution kinetics and the symmetry of the cathodic kinetics between the coupled electrodes, where the ultralong transient might correspond to the propagation of film damage with a slow anodic dissolution rate. The dynamic cathodic resistance during the final stage of transient current growth can serve as a characteristic parameter that reflects the loss of passive film protection.
Originality/value
Estimation of the local anodic current trace opens a new way for individual electrochemical transient analysis associated with the charges involved, local current densities and changes in film resistance throughout localized corrosion processes.
Details
Keywords
Raja Usman Khalid, Muhammad Shakeel Sadiq Jajja and Muhammad Bilal Ahsan
This article aims to evaluate published food cold chain (FCC) literature against risk management and supply chain sustainability concepts.
Abstract
Purpose
This article aims to evaluate published food cold chain (FCC) literature against risk management and supply chain sustainability concepts.
Design/methodology/approach
The article uses the theory refinement logic proposed by Seuring et al. (2021) to analyze the contents of FCC management-related literature published over the past 20 years. A sample of 116 articles was gathered using Web of Science and subsequently analyzed. The respective articles were then systematically coded against the frameworks of Beske and Seuring (2014) and Vlajic et al. (2012), which focused on building sustainable and robust supply chains, respectively.
Findings
The literature review revealed that debates around managing contemporary sources of disruptions/vulnerability and making FCCs more sustainable and resilient are gradually developing. However, an overarching risk management perspective along with incorporating social and environmental dimensions in managing FCCs still needs the adequate attention of the respective research community.
Research limitations/implications
The deductive internal logic of theory refinement approach used in this paper could have been further strengthened by using additional frameworks. This limitation, however, opens avenues for further research. The findings of the paper will stimulate the interest of future researchers to work on expanding our understanding related to sustainability and risk management in FCCs.
Originality/value
The paper is the first attempt to organize published FCC literature along dimensions of supply chain sustainability and risk management. The paper thus provides the respective researchers with a foundation that will help them adopt a focused approach to addressing the research gaps.
Details
Keywords
Jingjing Sun, Ziming Zeng, Tingting Li and Shouqiang Sun
The outbreak of COVID-19 has become a major public health emergency worldwide. How to effectively guide public opinion and implement precise prevention and control is a hot topic…
Abstract
Purpose
The outbreak of COVID-19 has become a major public health emergency worldwide. How to effectively guide public opinion and implement precise prevention and control is a hot topic in current research. Mining the spatiotemporal coupling between online public opinion and offline epidemics can provide decision support for the precise management and control of future emergencies.
Design/methodology/approach
This study focuses on analyzing the spatiotemporal coupling relationship between public opinion and the epidemic. First, based on Weibo information and confirmed case information, a field framework is constructed using field theory. Second, SnowNLP is used for sentiment mining and LDA is utilized for topic extraction to analyze the topic evolution and the sentiment evolution of public opinion in each coupling stage. Finally, the spatial model is used to explore the coupling relationship between public opinion and the epidemic in space.
Findings
The findings show that there is a certain coupling between online public opinion sentiment and offline epidemics, with a significant coupling relationship in the time dimension, while there is no remarkable coupling relationship in space. In addition, the core topics of public concern are different at different coupling stages.
Originality/value
This study deeply explores the spatiotemporal coupling relationship between online public opinion and offline epidemics, adding a new research perspective to related research. The result can help the government and relevant departments understand the dynamic development of epidemic events and achieve precise control while mastering the dynamics of online public opinion.
Details
Keywords
Drawing on the work of Niklas Luhmann, the paper argues that technology can be viewed as a self-referential system which is autonomous from both human beings and other function…
Abstract
Purpose
Drawing on the work of Niklas Luhmann, the paper argues that technology can be viewed as a self-referential system which is autonomous from both human beings and other function systems of society. The paper aims to develop a philosophy of technology from the work of Niklas Luhmann. To achieve this aim, it draws upon the systems-theory work of Jacques Ellul, a philosopher of technology who focuses on the autonomous potential of technological evolution.
Design/methodology/approach
The paper draws on the work of Niklas Luhmann and Jacques Ellul to explore the theme of autonomous technology and what this means for our thinking about technological issues in the twenty-first century. Insights from these two thinkers and researchers working in the Luhmannian sociological tradition are applied to remote work.
Findings
The sociological approach of Luhmann, coupled with Ellul's insights into the autonomous nature of technology, can help us develop a systems theory of technology which takes seriously its irreducibility to human functions.
Research limitations/implications
The paper contributes to the growing sociological literature that thematizes the Luhmannian approach to technology, helping us better understand this phenomenon and think in new ways about what technological autonomy means.
Originality/value
The paper brings together the work of Luhmann, Ellul and contemporary researchers to advance a new understanding of technology and technological communication.
Details
Keywords
Fractional Fokker-Planck equation (FFPE) and time fractional coupled Boussinesq-Burger equations (TFCBBEs) play important roles in the fields of solute transport, fluid dynamics…
Abstract
Purpose
Fractional Fokker-Planck equation (FFPE) and time fractional coupled Boussinesq-Burger equations (TFCBBEs) play important roles in the fields of solute transport, fluid dynamics, respectively. Although there are many methods for solving the approximate solution, simple and effective methods are more preferred. This paper aims to utilize Laplace Adomian decomposition method (LADM) to construct approximate solutions for these two types of equations and gives some examples of numerical calculations, which can prove the validity of LADM by comparing the error between the calculated results and the exact solution.
Design/methodology/approach
This paper analyzes and investigates the time-space fractional partial differential equations based on the LADM method in the sense of Caputo fractional derivative, which is a combination of the Laplace transform and the Adomian decomposition method. LADM method was first proposed by Khuri in 2001. Many partial differential equations which can describe the physical phenomena are solved by applying LADM and it has been used extensively to solve approximate solutions of partial differential and fractional partial differential equations.
Findings
This paper obtained an approximate solution to the FFPE and TFCBBEs by using the LADM. A number of numerical examples and graphs are used to compare the errors between the results and the exact solutions. The results show that LADM is a simple and effective mathematical technique to construct the approximate solutions of nonlinear time-space fractional equations in this work.
Originality/value
This paper verifies the effectiveness of this method by using the LADM to solve the FFPE and TFCBBEs. In addition, these two equations are very meaningful, and this paper will be helpful in the study of atmospheric diffusion, shallow water waves and other areas. And this paper also generalizes the drift and diffusion terms of the FFPE equation to the general form, which provides a great convenience for our future studies.
Details
Keywords
Mohamed Beneldjouzi, Mohamed Hadid and Nasser Laouami
Several studies were made on paired site and soil–structure interaction (SSI) effects, but most of them were site specific. This paper aims to investigate the impact of SSI…
Abstract
Purpose
Several studies were made on paired site and soil–structure interaction (SSI) effects, but most of them were site specific. This paper aims to investigate the impact of SSI effects in conjunction with local soil condition effects on the seismic response of typical multistory low- to mid-rise–reinforced concrete (RC) buildings resting on Algerian regulatory design sites through a global explicit transfer function (TF).
Design/methodology/approach
A preliminary quantification of SSI effects associated with site effects is carried out through a frequency-domain solution based on the concept of rock-to-soil surface displacement TF performed for each design site category. It results from the combination of the TFs of structure, foundation and soil and reflects how seismic waves are amplified due to changes in the geological contrast between the rock and overlying soil deposits. As well, response modification factors, denoting displacement ratios of the building responses within the flexible and site-structure conditions with respect to the fixed-base one, are carried out.
Findings
In the context of Algerian seismic regulation, the study provides a clear vision of how and when site or SSI effects are expected to be influential, as opposed to the fixed-base hypothesis still retained by the current regulation. This helps engineers to be aware of the extent of the expected seismic damage.
Research limitations/implications
The research applies to low- to mid-rise RC buildings within the Algerian seismic regulation, but it may also be expanded to other examples that fall under other seismic regulations.
Practical implications
The response modification ratio is a quantitative approach to assessing response fluctuations. It draws attention to how the roof level drift varies depending on the condition. These results can be used as numerical parameters in structural seismic design when the structure is comparable because they provide useful information about how the two phenomena interact with the structure.
Originality/value
The study goes beyond particular situations dealing with site specific and offers effective indicators and quantitative evaluation of combined site and SSI effects according to the current national seismic provisions, where no indication about site or SSI effects exists.
Details
Keywords
Sarah Heminger, Vishal Arghode and Som Sekhar Bhattacharyya
The purpose of this empirical investigation was to explore the interrelationship between psychological capital (PsyCaP) and impostor phenomenon (IP) experienced by entrepreneurs.
Abstract
Purpose
The purpose of this empirical investigation was to explore the interrelationship between psychological capital (PsyCaP) and impostor phenomenon (IP) experienced by entrepreneurs.
Design/methodology/approach
The researchers performed exploratory data analysis, using a correlation matrix that included the composite score of all PsyCap dimensions (psychological capital questionnaire [PCQ-24]) and the factor scores of hope, self-efficacy, resilience and optimism. The data analysis was conducted in relation to participants’ IP scores.
Findings
The study results demonstrated that a negative relationship was present between entrepreneurs’ Clance impostor phenomenon scale (CIPS) factor scores (consisting of hope, self-efficacy, resilience and optimism) and PsyCap dimensions (PCQ-24) composite subscales. This indicated that higher levels of PsyCaP were associated with lower levels of IP experience by entrepreneurs.
Research limitations/implications
Theoretically, it must be noted that, based upon these study results, both “impostor phenomenon” and entrepreneurial identity formation occurred among entrepreneurs. It was known to be associated with external environmental, situational and societal factors. The researchers established the relationship between entrepreneurs’ “impostor phenomenon” and “psychological capital (PsyCap)”.
Practical implications
Entrepreneurs and executives associated with business accelerators and incubators should comprehend the link between IP and PsyCap in entrepreneurs. This would enhance the well-being of entrepreneurs in their challenging context. Entrepreneurs and executives associated with business accelerators and incubators might explore the effectiveness of PsyCap-based interventions, along with IP-related considerations.
Originality/value
This was one of the first empirical studies investigating and establishing the relationship between entrepreneurs’ “impostor phenomenon” and “psychological capital (PsyCap)”.
Details
Keywords
Mario Gonzalez-Fuentes, Jonathan Ross Gilbert, Robert F. Scherer and Carlos Iglesias-Fernandez
A pronounced rise in postpandemic immigration is creating consumption opportunities and challenges for countries worldwide. Past research has shown that immigrant homeownership…
Abstract
Purpose
A pronounced rise in postpandemic immigration is creating consumption opportunities and challenges for countries worldwide. Past research has shown that immigrant homeownership indicates advanced consumer acculturation. However, critical factors which differentiate immigrant decisions to purchase a home remain underexplored. This study aims to examine the importance of different identity resources in determining homeownership gaps between immigrant groups in Spain during a dynamic decade.
Design/methodology/approach
A mixed methods research design with triangulation was used. First, the critical “historical research method” is used to empirically assess 15,465 household-level microdata files from the National Immigrant Survey of Spain. Second, the analysis is corroborated through informant interviews, an evaluation of digital news archives and other historical traces such as relevant advertisements in Spain from 2000 to 2009.
Findings
Results provided an account of immigrant homeownership whereby foreign-born consumers leveraged resources to promote social identities aligned with an advanced level of acculturation through housing investment during this period. Furthermore, marketing focused on specific targets of ethnic minority consumers coupled with government policies to promote immigrant homeownership reinforced the “Spanish Dream” as a new paradigm for housing market integration.
Originality/value
Spain provides an unprecedented historical context to explain marketing-related phenomena due to a perfect storm of immigration, job availability and integration supports. Contrary to popular wisdom, immigrant consumer homeownership gaps are not solely a result of differences in income and economic mobility, but rather an advanced acculturation outcome driven by personal and social investments in resources that lead to consumer identities.
Details
Keywords
Ebenezer Adaku, Victor Osei-Poku, Jemima Antwiwaa Ottou and Adwoa Yirenkyi-Fianko
The phenomenon of delayed payment to contractors, particularly in the construction industry, is a vital one and has implications for the health of economies of both developing and…
Abstract
Purpose
The phenomenon of delayed payment to contractors, particularly in the construction industry, is a vital one and has implications for the health of economies of both developing and developed countries. However, the knowledge of this phenomenon seems patchy and scattered. This paper aims to provide a comprehensive overview of the knowledge on the subject matter with directions for future research.
Design/methodology/approach
A systematic literature review coupled with a scientometric analysis was used to identify the main strands of delayed payment to contractor research as a basis for qualitative analysis and directions for future investigations.
Findings
Current trends of delayed payment to contractor research are categorised into five broad themes, namely: causes, effects, mitigation measures, ethical and law and regulatory issues. On the basis of these themes, directions for future research are proffered.
Originality/value
To the best of the authors knowledge, this is the first attempt at providing a comprehensive and an integrated knowledge on delayed payment to contractor research with pointers for further investigation and policy directions.
Details