Search results

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

The first-aid courses organized by the Youth Red Cross Carinthia (Austria) had a quality problem, necessitating a professionalization in teaching and time structure. This research aimed to enhance the quality and effectiveness of these courses by implementing modified lesson studies with non-professional trainers. The paper presents the realization process, empirical research and results obtained by applying the first-aid curriculum.

Around 22 lesson study first-aid courses (14 classes with 2 cycles, 8 with 3 cycles) were conducted and evaluated in different Austrian school types. An observation sheet was created to evaluate attention and competencies. Interviews were conducted with both teachers and students to validate the results.

The research findings demonstrate that lesson studies can significantly enhance the quality and effectiveness of first-aid courses. Inexperienced and experienced first-aid teachers significantly improved their teaching skills. Newly educated first-aid teachers showed substantial improvement, leading to the introduction of an induction period and coaching opportunity within the Youth Red Cross Carinthia.

This is the first lesson study conducted in a non-academic context. It highlights the adaptation process of Carinthian first-aid courses. It illustrates how lesson studies impact lesson clarity, instructional variety, student engagement in the learning process, student outcome, student feedback and teaching effectiveness in a non-academic context. It contributes to the literature on the application of lesson study in first-aid education and provides insight into the benefits of this approach in enhancing the quality of first-aid training.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

This study aims to explore and empirically test variables influencing material delivery schedule inaccuracies?

A mixed-method case approach is applied. Explanatory variables are identified from the literature and explored in a qualitative analysis at an automotive original equipment manufacturer. Using logistic regression and random forest classification models, quantitative data (historical schedule transactions and internal data) enables the testing of the predictive difference of variables under various planning horizons and inaccuracy levels.

The effects on delivery schedule inaccuracies are contingent on a decoupling point, and a variable may have a combined amplifying (complexity generating) and stabilizing (complexity absorbing) moderating effect. Product complexity variables are significant regardless of the time horizon, and the item’s order life cycle is a significant variable with predictive differences that vary. Decoupling management is identified as a mechanism for generating complexity absorption capabilities contributing to delivery schedule accuracy.

The findings provide guidelines for exploring and finding patterns in specific variables to improve material delivery schedule inaccuracies and input into predictive forecasting models.

The findings contribute to explaining material delivery schedule variations, identifying potential root causes and moderators, empirically testing and validating effects and conceptualizing features that cause and moderate inaccuracies in relation to decoupling management and complexity theory literature?

Authorities have set up numerous security checkpoints during times of armed conflict to control the flow of commercial and humanitarian trucks into and out of areas of conflict. These security checkpoints have become highly utilized because of the complex security procedures and increased truck traffic, which significantly slow the delivery of relief aid. This paper aims to improve the process at security checkpoints by redesigning the current process to reduce processing time and relieve congestion at checkpoint entrance gates.

A decision-support tool (clearing function distribution model [CFDM]) is used to minimize the effects of security checkpoint congestion on the entire humanitarian supply network using a hybrid simulation-optimization approach. By using a business process simulation, the current and reengineered processes are both simulated, and the simulation output was used to estimate the clearing function (capacity as a function of the workload). For both the AS-IS and TO-BE models, key performance indicators such as distribution costs, backordering and process cycle time were used to compare the results of the CFDM tool. For this, the Kerem Abu Salem security checkpoint south of Gaza was used as a case study.

The comparison results demonstrate that the CFDM tool performs better when the output of the TO-BE clearing function is used.

The efforts will contribute to improving the planning of any humanitarian network experiencing congestion at security checkpoints by minimizing the impact of congestion on the delivery lead time of relief aid to the final destination.

This study describes how maintenance capability should be created during the design and construction phases of construction projects. Purpose of the abstract to define the elements for creating the maintenance capability and the process to be used in construction life cycle projects for buildings.

An inductive and qualitative research method was used to construct the proposed process based on the literature and 18 interviews in two large construction companies.

The results indicate that the maintenance phase is usually overlooked during the design and construction phases, and capabilities are not systematically built. In particular, processes are lacking in data management, causing severe problems in maintenance.

This study presents a process including key requirements and activities for creating maintenance capability in conjunction with the design and construction phases, which is novel to the literature. The validated process can be adapted based on the needs of the construction company.

The purpose of this action research study was to design, implement and evaluate interventions that enhanced the induction program for new teachers in a P-12 school district. At the outset, we hoped the study would provide new teacher support resulting in improved teaching practices, increased job satisfaction and/or increased teacher retention among the target population. With this in mind, our research question was: What structures and supports from a school-university partnership facilitate capacity-building among university teacher education faculty, school and district leaders, mentor teachers, and new teachers in the context of an induction program?

This study used an intervention-centered mode of action research methodology that aims to make systems-level change. This type of action research intends to solve real organizational problems with a focus on conducting “research in action” rather than “research about action” (Coghlan and Brannick, 2014, pp. 5–6). This approach necessitates that data collection and analysis are iterative processes, occurring throughout the research process, instead of solely at the end stages of the research process. Our action research process used Coghlan and Brannick’s (2014) action research cycle model. The cyclical four-step process includes constructing (verifying the problem in the local context), planning action, taking action and evaluating action. Facilitated by the interim director of a Professional development schools (PDS) partnership in the Southeastern United States, a team of co-researchers which included three university teacher education faculty and four school district administrators used action research methodology to create systemic change that enhanced the district’s induction program. We collected data through multiple qualitative methods, including surveys, focus groups, observations and interviews during the course of three action research cycles. These data and our theoretical framework (complex adaptive systems theory and social network theory) informed two major interventions that supported new teachers during the challenging first year of the coronavirus disease (COVID-19) pandemic.

The interventions and the research process were mutually beneficial for both institutions and contributed to professional learning and growth at the individual, group and system levels. The three major findings described include: (1) engaging in collaborative action research is mutually beneficial for both schools and universities; (2) induction programs benefit from university resources; (3) learning communities build all educators’ professional capacity.

Our research recommendations are: (1) more research is needed on the benefits of school-university partnerships to induction programs; (2) school-university partnerships should leverage action research to improve systems; (3) within school-university partnerships, the connection between collaborative leadership and sustainability requires further research. One limitation was that this study was conducted in a single school-university partnership context involving a large public university and a mid-sized public school district that had a well-established partnership. More induction-centered research is needed in different types of school-university partnership contexts that have varying levels of longevity and partnership structures.

Our recommendations for practice include (1) school-university partnerships should leverage collaborative learning communities to catalyze individual, group and systems-level learning and change, and (2) school-university partnerships must prioritize induction support to strengthen the teaching profession.

Since Hunt’s (2014) literature review on induction support in PDS partnerships, very few empirical studies have been conducted in this research area. This study, which examined induction support in a PDS partnership over a two-year period, makes a significant contribution to the scholarly literature on induction teacher support in school-university partnership contexts. Facilitated by the interim director of a PDS partnership, a team of co-researchers, which included three university teacher education faculty and four school district administrators, used action research methodology to create systems-level supports that enhanced the district’s induction program.

This study aims to systematise the links between firms’ strategies (corporate and business) and the cluster dynamics (through the cluster life cycle [CLC] perspective) and propose an integrative framework bridging firms’ strategic behaviour and cluster dynamics (CLC).

The methodology used is an integrative literature review, which provides a distinctive form of research.

The study identifies several links between firms’ strategies (corporate and business) and the cluster dynamics (CLC), namely: (1) firms’ strategies as a triggering factor of cluster evolution; (2) firms’ strategies and path's decline; (3) firms’ strategies and cluster’s renewal; (4) resilience strategies and the cluster life cycle; and (5) cluster’s features and firms’ strategies.

This study contributes to developing strategic management theory and cluster theory by bridging firms' strategies and cluster dynamics (CLC). It proposes a new conceptualisation of the impact of cluster dynamics on firms' strategic choices – firstly, it proposes a specific approach to identify the CLC; and secondly, it develops an integrative framework model that relates firms' strategies and each stage of the CLC. These are theoretical tools relevant for further advancements in this area of research, as they can be applied in studies of different clusters for validation, something that was not done.

The integrative framework is expected to be helpful to company managers, allowing them to design better strategies that account for dynamic cluster environments.

This study aims to fill this gap in the literature by systematising the links between firms' strategies (corporate and business) and the cluster dynamics (CLC).

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.