Search results

This paper aims to propose and verify an improved cascade active disturbance rejection control (ADRC) scheme based on output redefinition for hypersonic vehicles (HSVs) with nonminimum phase characteristic and model uncertainties.

To handle the nonminimum phase characteristic, a tuning factor stabilizing internal dynamics is introduced to redefine the system output states; its effective range is determined by analyzing Byrnes–Isidori normalized form of the redefined system. The extended state observers (ESOs) are used to estimate the uncertainties, which include matched and mismatched items in the system. The controller compensates observations in real time and appends integral terms to improve robustness against the estimation errors of ESOs.

Theoretical and simulation results show that the stability of internal dynamics is guaranteed by the tuning factor and the tracking errors of external commands are globally asymptotically stable.

The control scheme in this paper is expected to generate a reliable way for dealing with nonminimum phase characteristic and model uncertainties of HSVs.

In the framework of ADRC, a concise form of redefined outputs is proposed, in which the tuning factor performs a decisive role in stabilizing the internal dynamics of HSVs. By introducing an integral term into the cascade ADRC scheme, the compensation accuracy of matched and mismatched disturbances is improved.

To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of 100:1 are often used in the joints of a robotic manipulator. This results into an actuator with large mechanical impedance (also known as nonback-drivable actuator). This in turn generates high contact forces when collision of the robotic mechanism occur and can cause humans’ injury. Another disadvantage of electric actuators is that they can exhibit overheating when constant torques have to be provided. Comparing to electric actuators, pneumatic actuators have promising properties for robotic applications, due to their low weight, simple mechanical design, low cost and good power-to-weight ratio. Electropneumatically actuated robots usually have better friction properties. Moreover, because of low mechanical impedance, pneumatic robots can provide moderate interaction forces which is important for robotic surgery and rehabilitation tasks. Pneumatic actuators are also well suited for exoskeleton robots. Actuation in exoskeletons should have a fast and accurate response. While electric motors come against high mechanical impedance and the risk of causing injuries, pneumatic actuators exhibit forces and torques which stay within moderate variation ranges. Besides, unlike direct current electric motors, pneumatic actuators have an improved weight-to-power ratio and avoid overheating problems.

The aim of this paper is to analyze a nonlinear optimal control method for electropneumatically actuated robots. A two-link robotic exoskeleton with electropneumatic actuators is considered as a case study. The associated nonlinear and multivariable state-space model is formulated and its differential flatness properties are proven. The dynamic model of the electropneumatic robot is linearized at each sampling instance with the use of first-order Taylor series expansion and through the computation of the associated Jacobian matrices. Within each sampling period, the time-varying linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. An H-infinity controller is designed for the linearized model of the robot aiming at solving the related optimal control problem under model uncertainties and external perturbations. An algebraic Riccati equation is solved at each time-step of the control method to obtain the stabilizing feedback gains of the H-infinity controller. Through Lyapunov stability analysis, it is proven that the robot’s control scheme satisfies the H-infinity tracking performance conditions which indicate the robustness properties of the control method. Moreover, global asymptotic stability is proven for the control loop. The method achieves fast convergence of the robot’s state variables to the associated reference trajectories, and despite strong nonlinearities in the robot’s dynamics, it keeps moderate the variations of the control inputs.

In this paper, a novel solution has been proposed for the nonlinear optimal control problem of robotic exoskeletons with electropneumatic actuators. As a case study, the dynamic model of a two-link lower-limb robotic exoskeleton with electropneumatic actuators has been considered. The dynamic model of this robotic system undergoes first approximate linearization at each iteration of the control algorithm around a temporary operating point. Within each sampling period, this linearization point is defined by the present value of the robot’s state vector and by the last sampled value of the control inputs vector. The linearization process relies on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modeling error which is due to the truncation of higher-order terms from the Taylor series is considered to be a perturbation which is asymptotically compensated by the robustness of the control algorithm. To stabilize the dynamics of the electropneumatically actuated robot and to achieve precise tracking of reference setpoints, an H-infinity (optimal) feedback controller is designed. Actually, the proposed H-infinity controller for the model of the two-link electropneumatically actuated exoskeleton achieves the solution of the associated optimal control problem under model uncertainty and external disturbances. This controller implements a min-max differential game taking place between: (i) the control inputs which try to minimize a cost function which comprises a quadratic term of the state vector’s tracking error and (ii) the model uncertainty and perturbation inputs which try to maximize this cost function. To select the stabilizing feedback gains of this H-infinity controller, an algebraic Riccati equation is being repetitively solved at each time-step of the control method. The global stability properties of the H-infinity control scheme are proven through Lyapunov analysis.

Pneumatic actuators are characterized by high nonlinearities which are due to air compressibility, thermodynamics and valves behavior and thus pneumatic robots require elaborated nonlinear control schemes to ensure their fast and precise positioning. Among the control methods which have been applied to pneumatic robots, one can distinguish differential geometric approaches (Lie algebra-based control, differential flatness theory-based control, nonlinear model predictive control [NMPC], sliding-mode control, backstepping control and multiple models-based fuzzy control). Treating nonlinearities and fault tolerance issues in the control problem of robotic manipulators with electropneumatic actuators has been a nontrivial task.

The novelty of the proposed control method is outlined as follows: preceding results on the use of H-infinity control to nonlinear dynamical systems were limited to the case of affine-in-the-input systems with drift-only dynamics. These results considered that the control inputs gain matrix is not dependent on the values of the system’s state vector. Moreover, in these approaches the linearization was performed around points of the desirable trajectory, whereas in the present paper’s control method the linearization points are related with the value of the state vector at each sampling instance as well as with the last sampled value of the control inputs vector. The Riccati equation which has been proposed for computing the feedback gains of the controller is novel, so is the presented global stability proof through Lyapunov analysis. This paper’s scientific contribution is summarized as follows: (i) the presented nonlinear optimal control method has improved or equally satisfactory performance when compared against other nonlinear control schemes that one can consider for the dynamic model of robots with electropneumatic actuators (such as Lie algebra-based control, differential flatness theory-based control, nonlinear model-based predictive control, sliding-mode control and backstepping control), (ii) it achieves fast and accurate tracking of all reference setpoints, (iii) despite strong nonlinearities in the dynamic model of the robot, it keeps moderate the variations of the control inputs and (iv) unlike the aforementioned alternative control approaches, this paper’s method is the only one that achieves solution of the optimal control problem for electropneumatic robots.

The use of electropneumatic actuation in robots exhibits certain advantages. These can be the improved weight-to-power ratio, the lower mechanical impedance and the avoidance of overheating. At the same time, precise positioning and accurate execution of tasks by electropneumatic robots requires the application of elaborated nonlinear control methods. In this paper, a new nonlinear optimal control method has been developed for electropneumatically actuated robots and has been specifically applied to the dynamic model of a two-link robotic exoskeleton. The benefit from using this paper’s results in industrial and biomedical applications is apparent.

A comparison of the proposed nonlinear optimal (H-infinity) control method against other linear and nonlinear control schemes for electropneumatically actuated robots shows the following: (1) Unlike global linearization-based control approaches, such as Lie algebra-based control and differential flatness theory-based control, the optimal control approach does not rely on complicated transformations (diffeomorphisms) of the system’s state variables. Besides, the computed control inputs are applied directly on the initial nonlinear model of the electropneumatic robot and not on its linearized equivalent. The inverse transformations which are met in global linearization-based control are avoided and consequently one does not come against the related singularity problems. (2) Unlike model predictive control (MPC) and NMPC, the proposed control method is of proven global stability. It is known that MPC is a linear control approach that if applied to the nonlinear dynamics of the electropneumatic robot, the stability of the control loop will be lost. Besides, in NMPC the convergence of its iterative search for an optimum depends on initialization and parameter values selection and consequently the global stability of this control method cannot be always assured. (3) Unlike sliding-mode control and backstepping control, the proposed optimal control method does not require the state-space description of the system to be found in a specific form. About sliding-mode control, it is known that when the controlled system is not found in the input-output linearized form the definition of the sliding surface can be an intuitive procedure. About backstepping control, it is known that it cannot be directly applied to a dynamical system if the related state-space model is not found in the triangular (backstepping integral) form. (4) Unlike PID control, the proposed nonlinear optimal control method is of proven global stability, the selection of the controller’s parameters does not rely on a heuristic tuning procedure, and the stability of the control loop is assured in the case of changes of operating points. (5) Unlike multiple local models-based control, the nonlinear optimal control method uses only one linearization point and needs the solution of only one Riccati equation so as to compute the stabilizing feedback gains of the controller. Consequently, in terms of computation load the proposed control method for the electropneumatic actuator’s dynamics is much more efficient.

Implementing the 17 Sustainable Development Goals (SDGs) unarguably demands huge financial investments. However, the United Nations has acknowledged the huge financial gap militating against the implementation of the SDGs worldwide, leading experts to question the possibility of complete implementation of the goals by their terminal dateline of 2030. While the bulk of the finance currently outlaid on the SDGs comes from traditional sources including foreign direct investments (FDIs), there is the need to focus more attention on developing and exploiting impact investments that are more suitable for financing development programmes and projects. In this chapter, the SDG implementation profiles of the 12 Arab West Asia countries concerning the five most targeted SDGs were evaluated and sustainable finance issues were discussed. Secondary data were retrieved from World Bank's DataBank. The data were descriptively analyzed. Based on the profiles generated, debt relief is put forward as a possible impact investment mechanism suitable for funding the SDGs. Specifically, this chapter recommends that outright cancellation of debts based on the debt-for-SGD swap could serve as some of the impact investments needed to boost the global drive for a developed, peaceful, and just world.

In order to meet the different quality of service (QoS) requirements of vehicle-to-infrastructure (V2I) and multiple vehicle-to-vehicle (V2V) links in vehicle networks, an efficient V2V spectrum access mechanism is proposed in this paper.

A long-short-term-memory-based multi-agent hybrid proximal policy optimization (LSTM-H-PPO) algorithm is proposed, through which the distributed spectrum access and continuous power control of V2V link are realized.

Simulation results show that compared with the baseline algorithm, the proposed algorithm has significant advantages in terms of total system capacity, payload delivery success rate of V2V link and convergence speed.

The LSTM layer uses the time sequence information to estimate the accurate system state, which ensures the choice of V2V spectrum access based on local observation effective. The hybrid PPO framework shares training parameters among agents which speeds up the entire training process. The proposed algorithm adopts the mode of centralized training and distributed execution, so that the agent can achieve the optimal spectrum access based on local observation information with less signaling overhead.

Nowadays, nations are rapidly changing and evolving, both because of global competitiveness and technological development. The fast change of the economies and the interconnected world has brought a more globalized world than ever. The purpose of this paper is to assess Romania (RO) and Türkiye (TR) by using a customized version of Porter’s diamond model (PDM), with an emphasis on identifying the key components of their innovation systems.

The paper uses a recognized model to unfold its structure. Based on the PDM, this paper tackles the topic of innovation systems both of RO and TR. Applying the model, a mapping of indicators representing components of the national innovation system is made possible. Besides the traditional four determinants (dimensions) of the model, the authors adapted it and added the technology conditions. Using the five dimensions, a comparison of strategical objectives is made between RO and TR.

The results show the potential for both countries to develop and embrace the innovation capacity, while there is still room for improvement in this regard. Another point is the map of innovation system components that were used for the comparison. The implications of innovation are analyzed at a strategical level, comparing the mapping with the national strategical objectives.

There are many studies using this model, however a few bring into the light the impact of innovation systems at national level. Hence, a new framework is provided to evaluate innovative systems using a selection of modern indicators. This study uses an existing model in literature, Porter’s model mapping indicators, which highlight the innovation capacity.

This study aims to explore the potential benefits of integrating Artificial Intelligence (AI) with Social Emotional Learning (SEL) in educational settings.

A systematic review of emerging AI technologies such as virtual reality, chatbots, sentiment analysis tools, gamification and wearable devices is conducted to assess their applicability in enhancing SEL.

AI technologies present opportunities for personalized support, increased engagement, empathy development and promotion of well-being within SEL frameworks.

Future research should focus on addressing ethical concerns, fostering interdisciplinary collaborations, conducting longitudinal studies, promoting cultural sensitivity and developing robust ecosystems for AI in SEL.

This study contributes by outlining pathways for leveraging AI to create inclusive and supportive learning environments that nurture students' socio-emotional competencies, preparing them for success in a globally connected world.

In recent times, there has been a lot of research focused on performance measurement (PM) in project-based sectors. However, there are very few studies that were reported on the significance of PM in the construction sector. Keeping track of an organization in achieving organizations goals and objectives seems an important way. One of the major challenges faced by the industry is unavailable of an appropriate PM system for assessing organizational performance. Most of the PM approaches consider the traditional project triangle assessment of project success. Based on the limitations identified in existing PM models, the purpose of this paper is to develop a comprehensive PM model, i.e. Modified Project Quarter Back Rating (MPQR) applicable for construction projects.

A detailed list of performance areas as a method for PM is analyzed in the construction industry context. Also, industry-specific professionals conducted semi-structured interviews to assess whether these performance areas are sufficient to measure and understand the PM systems.

The research finding focuses on developing the MPQR model that considers both financial and non-financial areas for performance assessment to provide a holistic assessment of project performance.

MPQR model provides an opportunity to set the benchmark for overall performance for construction organizations.

The findings of the study are expected to provide guidelines to construction professionals for implementing the performance model that will improve performance in the construction industry.

This paper aims to present a novel adaptive sliding mode control (ASMC) method based on the predefined performance barrier function for reusable launch vehicle under attitude constraints and mismatched disturbances.

A novel ASMC based on barrier function is adopted to deal with matched and mismatched disturbances. The upper bounds of the disturbances are not required to be known in advance. Meanwhile, a predefined performance function (PPF) with prescribed convergence time is used to adjust the boundary of the barrier function. The transient performance, including the overshoot, convergence rate and settling time, as well as the steady-state performance of the attitude tracking error are retained in the predetermined region under the barrier function and PPF. The stability of the proposed control method is analyzed via Lyapunov method.

In contrast to conventional adaptive back-stepping methods, the proposed method is comparatively simple and effective which does not need to disassemble the control system into multiple first-order systems. The proposed barrier function based on PPF can adjust not only the switching gain in an adaptive way but also the convergence time and steady-state error. And the efficiency of the proposed method is illustrated by conducting numerical simulations.

A novel barrier function based ASMC method is proposed to fit in the amplitude of the mismatched and matched disturbances. The transient and steady-state performance of attitude tracking error can be selected as prior control parameters.

This study aims to address the issue of random movement and non coordination between docking mechanisms and locking mechanisms, and proposes a comprehensive dynamic docking control architecture that integrates perception, planning, and motion control.

Firstly, the proposed dynamic docking control architecture uses laser sensors and a charge-coupled device camera to perceive the pose of the target. The sensor data are mapped to a high-dimensional potential field space and fused to reduce interference caused by detection noise. Next, a new potential function based on multi-dimensional space is developed for docking path planning, which enables the docking mechanism based on Stewart platform to rapidly converge to the target axis of the locking mechanism, which improves the adaptability and terminal docking accuracy of the docking state. Finally, to achieve precise tracking and flexible docking in the final stage, the system combines a self-impedance controller and an impedance control algorithm based on the planned trajectory.

Extensive simulations and experiments have been conducted to validate the effectiveness of the dynamic docking system and its control architecture. The results indicate that even if the target moves randomly, the system can successfully achieve accurate, stable and flexible dynamic docking.

This research can provide technical guidance and reference for docking task of unmanned vehicles under the ground conditions. It can also provide ideas for space docking missions, such as space simulator docking.

Soft robots are known for their excellent safe interaction ability and promising in surgical applications for their lower risks of damaging the surrounding organs when operating than their rigid counterparts. To explore the potential of soft robots in cardiac surgery, this paper aims to propose an adaptive iterative learning controller for tracking the irregular motion of the beating heart.

In continuous beating heart surgery, providing a relatively stable operating environment for the operator is crucial. It is highly necessary to use position-tracking technology to keep the target and the surgical manipulator as static as possible. To address the position tracking and control challenges associated with dynamic targets, with a focus on tracking the motion of the heart, control design work has been carried out. Considering the lag error introduced by the material properties of the soft surgical robotic arm and system delays, a controller design incorporating iterative learning control with parameter estimation was used for position control. The stability of the controller was analyzed and proven through the construction of a Lyapunov function, taking into account the unique characteristics of the soft robotic system.

The tracking performance of both the proportional-derivative (PD) position controller and the adaptive iterative learning controller are conducted on the simulated heart platform. The results of these two methods are compared and analyzed. The designed adaptive iterative learning control algorithm for position control at the end effector of the soft robotic system has demonstrated improved control precision and stability compared with traditional PD controllers. It exhibits effective compensation for periodic lag caused by system delays and material characteristics.

Tracking the beating heart, which undergoes quasi-periodic and complex motion with varying accelerations, poses a significant challenge even for rigid mechanical arms that can be precisely controlled and makes tracking targets located at the surface of the heart with the soft robot fraught with considerable difficulties. This paper originally proposes an adaptive interactive learning control algorithm to cope with the dynamic object tracking problem. The algorithm has theoretically proved its convergence and experimentally validated its performance at the cable-driven soft robot test bed.