Search results

This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current.

A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method.

By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents.

The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

This article aims to present a direct solution to handle linear constraints in finite element (FE) analysis without penalties or the Lagrange multipliers introduced.

First, the system of linear equations corresponding to the linear constraints is solved for the leading variables in terms of the free variables and the constants. Then, the reduced system of equilibrium equations with respect to the free variables is derived from the finite-dimensional virtual work equation. Finally, the algorithm is designed.

The proposed procedure is promising in three typical cases: (1) to enforce displacement constraints in any direction; (2) to implement local refinements by allowing hanging nodes from element subdivision and (3) to treat non-matching grids of distinct parts of the problem domain. The procedure is general and suitable for 3D non-linear analyses.

The algorithm is fitted only to the Galerkin-based numerical methods.

The proposed procedure does not need Lagrange multipliers or penalties. The tangential stiffness matrix of the reduced system of equilibrium equations reserves positive definiteness and symmetry. Besides, many contemporary Galerkin-based numerical methods need to tackle the enforcement of the essential conditions, whose weak forms reduce to linear constraints. As a result, the proposed procedure is quite promising.

The paper aims to propose an innovative two-stage decision model to address the sustainable-resilient supplier selection and order allocation (SSOA) problem in the single-valued neutrosophic (SVN) environment.

First, the sustainable and resilient performances of suppliers are evaluated by the proposed integrated SVN-base-criterion method (BCM)-an acronym in Portuguese of interactive and multi-criteria decision-making (TODIM) method, with consideration of the uncertainty in the decision-making process. Then, a novel multi-objective optimization model is formulated, and the best sustainable-resilient order allocation solution is found using the U-NSGA-III algorithm and TOPSIS method. Finally, based on a real-life case in the automotive manufacturing industry, experiments are conducted to demonstrate the application of the proposed two-stage decision model.

The paper provides an effective decision tool for the SSOA process in an uncertain environment. The proposed SVN-BCM-TODIM approach can effectively handle the uncertainties from the decision-maker’s confidence degree and incomplete decision information and evaluate suppliers’ performance in different dimensions while avoiding the compensatory effect between criteria. Moreover, the proposed order allocation model proposes an original way to improve sustainable-resilient procurement values.

The paper provides a supplier selection process that can effectively integrate sustainability and resilience evaluation in an uncertain environment and develops a sustainable-resilient procurement optimization model.

Learning from safety accidents and sharing safety knowledge has become an important part of accident prevention and improving construction safety management. Considering the difficulty of reusing unstructured data in the construction industry, the knowledge in it is difficult to be used directly for safety analysis. The purpose of this paper is to explore the construction of construction safety knowledge representation model and safety accident graph through deep learning methods, extract construction safety knowledge entities through BERT-BiLSTM-CRF model and propose a data management model of data–knowledge–services.

The ontology model of knowledge representation of construction safety accidents is constructed by integrating entity relation and logic evolution. Then, the database of safety incidents in the architecture, engineering and construction (AEC) industry is established based on the collected construction safety incident reports and related dispute cases. The construction method of construction safety accident knowledge graph is studied, and the precision of BERT-BiLSTM-CRF algorithm in information extraction is verified through comparative experiments. Finally, a safety accident report is used as an example to construct the AEC domain construction safety accident knowledge graph (AEC-KG), which provides visual query knowledge service and verifies the operability of knowledge management.

The experimental results show that the combined BERT-BiLSTM-CRF algorithm has a precision of 84.52%, a recall of 92.35%, and an F1 value of 88.26% in named entity recognition from the AEC domain database. The construction safety knowledge representation model and safety incident knowledge graph realize knowledge visualization.

The proposed framework provides a new knowledge management approach to improve the safety management of practitioners and also enriches the application scenarios of knowledge graph. On the one hand, it innovatively proposes a data application method and knowledge management method of safety accident report that integrates entity relationship and matter evolution logic. On the other hand, the legal adjudication dimension is innovatively added to the knowledge graph in the construction safety field as the basis for the postincident disposal measures of safety accidents, which provides reference for safety managers' decision-making in all aspects.

Construction and Demolition (C&D) Waste Management (WM) poses significant challenges in Sri Lanka, contributing to environmental degradation and resource depletion. To address these issues, this study explores the application of Circular Economy (CE) strategies in minimising waste generation and optimising resource utilisation in Sri Lankan construction industry. The research focuses on the construction and building renovation and use and operate stages of the building project life cycle, recognising their significance in waste generation and resource consumption.

The research employed a qualitative approach, utilising the Delphi technique through three rounds of expert interviews. Seventeen experts were involved in the first round, followed by fifteen in the second round, and twelve in the final round. The collected data was analysed using manual content analysis methods.

The research findings revealed fifteen C&D WM issues in the construction and building renovation stage in Sri Lanka, along with suitable strategies to overcome each of them. Similarly, eight C&D WM issues were identified for the use and operate stage of the building, and corresponding strategies were provided to address each issue. By adopting CE strategies such as modular design and material reuse, construction projects can optimise the project's timeline, cost, and quality factors. These strategies enable efficient resource allocation, reduce waste generation, and contribute to the overall sustainability of the project. The impact of CE strategies on mitigating these issues within the project management iron triangle was also discussed.

This paper entails delving into how construction, building renovation, and operation stages of a building's life cycle intersect with CE strategies, which profoundly influence operational efficiency and long-term sustainability. By incorporating principles such as energy efficiency, water conservation, and circular product design, the paper illuminates how these strategies facilitate decreased energy usage, enhanced resource management, and diminished waste production throughout the building's lifespan.

This study investigates the relationships among digital transformation, technological innovation, industry–university–research collaborations and labor income share in manufacturing firms.

The relationships are tested using an empirical method, constructing regression models, by collecting 1,240 manufacturing firms and 9,029 items listed on the A-share market in China from 2013 to 2020.

The results indicate that digital transformation has a positive effect on manufacturing companies’ labor income share. Technological innovation can mediate the effect of digital transformation on labor income share. Industry–university–research cooperation can positively moderate the promotion effect of digital transformation on labor income share but cannot moderate the mediating effect of technological innovation. Heterogeneity analysis also found that firms without service-based transformation and nonstate-owned firms are better able to increase their labor income share through digital transformation.

This study provides a new path to increase the labor income share of enterprises to achieve common prosperity, which is important for manufacturing enterprises to better transform and upgrade to achieve high-quality development.

The essence of finance has become essential in the sustainability discussion in recent times as a result of the capital intensive nature of sustainable projects. This has motivated financial experts and institutions to develop various financial instruments and mechanisms to further advance the course of protecting the environment, and decreasing the release of excess carbon and GreenHouse Gases. This is to also provide the opportunity for funding Green or sustainable infrastructure development. This chapter advances a discourse on matters relating to sustainable financing of infrastructure projects. The fundamentals of sustainable or green funding of infrastructure projects, and sustainable schemes of financing green infrastructure projects are discussed.

The principal objective of this current research is to explore and test an underlying mechanism to solve the inconsistent relationship between supervisors’ developmental feedback and employee creativity. This study also tests the moderating role of absorptive capacity in fully understanding the relationship between two constructs.

A time-lagged survey was utilized to collect data from 317 employees working at information technology (IT) organizations in Vietnam. This research conducted a hierarchical regression analysis to examine the hypotheses.

This research found that employees’ operational skills fully mediated the link between supervisors’ developmental feedback and employees’ creative performance. Moreover, absorptive capacity positively moderated the relationship between supervisors’ developmental feedback and employees’ operational skills as well as the relationship between employees’ operational skills and employee creativity.

This research is one of the first papers to discuss the mediating role of employees’ operational skills in associating supervisors’ developmental feedback with employee creativity in response to the calls of previous studies. To fully comprehend the indirect impact of supervisors' developmental feedback on workers' creative performance, this research also examines the moderating influence of absorptive capacity at the individual level.

Multi-well hydrofracturing is a key technology in engineering, and the evaluation, control and optimization of the fracturing network determine the recovery rate of unconventional oil and gas production. In engineering terms, altering well spacing and perforation initiation sequences changes fracture propagation behavior. Fracture propagation can result in fracture-to-fracture and well-to-well interactions. This may be attributed to the interference between fractures caused by squeezing of the reservoir strata. Meanwhile, the stratal movement caused by the propagation of the fractures may lead to either the secondary fracturing of wells with primary fractures or perforation to begin fracturing. Besides, the stratal compression and squeeze of multi-well hydrofracturing will cause earthquakes; the fracture size is different owing to the different fracturing scenarios, and the occurrence of induced microseismic events is still unknown; microseismic events also affect fracture orientation and deflection. If the mechanism of the above mechanical behavior cannot be clarified, optimizing the fracture network and reduce the induced microseismic disaster becomes difficult.

In this study, combined finite element-discrete element models were used to simulate the multi-well hydrofracturing. Numerical cases compared the fracture network, dynamic stratal movement and microseismic events at 50, 75 and 100 m well spacings, respectively, and varying initiation sequence of multiple horizontal wells.

From the results, fracture propagation in multi-well hydrofracturing may simulate the propagation and deflection of adjacent fractures and induce fracture-to-fracture and well-to-well interactions. As the well spacing increases, the effect of fracturing-induced stratal movement and squeezing deformation decrease. In alternate fracturing, starting from a well located in the middle can effectively reduce the influence of stratal movement on fracturing, and the fracturing scenario with cross-perforation can minimize the influence of stratal movement. The stratal movement between multiple wells is positively correlated to microseismic events, which behaviors can be effectively weakened by reducing the strata movement.

The fracture network, thermal-hydro-mechanical coupling, fracturing-induced stratal movement and microseismic events were analyzed. This study analyzed the intersection and propagation behavior of fractures in multi-well hydrofracturing, which can be used to evaluate and study the mechanism of hydrofracturing fracture network propagation in multiple horizontal wells and conduct fracture optimization research to form an optimized hydrofracturing scheme by reasonably arranging the spacing between wells and initiation sequences of perforation clusters.

The application of circular economy (CE) has received wide coverage in the built environment, including public-private partnership (PPP) infrastructure projects, in recent times. However, current studies and practical implementation of CE are largely associated with construction demolition, waste and recycling management. Few studies exist on circular models and success factors of public infrastructures developed within the PPP contracts. Thus, the main objective of this article is to identify the models and key success factors associated with CE implementation in PPP infrastructure projects.

A systematic review of the literature was undertaken in this study using forty-two (42) peer-reviewed journal articles from Scopus, Web of Science, Google Scholar and PubMed.

The results show that environmental factors, sustainable economic growth, effective stakeholder management, sufficient funding, utilization of low-carbon materials, effective supply chain and procurement strategies facilitate the implementation of CE in PPP infrastructure projects. Key CE business models are centered around the extension of project life cycle value, circular inputs and recycling and reuse of projects.

Although the study presents relevant findings and gaps for further investigations, it has a limited sample size of 42 papers, which is expected to increase as CE gain more prominence in PPP infrastructure management in future.

The findings are relevant for decision-making by PPP practitioners to attain the social, economic and environmental benefits of transitioning to circular infrastructure management.

This study contributes to articulating the key models and measures toward sustainable CE in public infrastructure development.