Industrial Lubrication and Tribology: Volume 63 Issue 5
Covers all automotive and industrial applications of lubricants
Table of contents
Application of a hybrid method to the bifurcation analysis of a relative short gas journal bearing system with herringbone grooves
Cheng‐Chi WangThis paper employs a hybrid numerical method combining the differential transformation method (DTM) and the finite difference method (FDM) to study the bifurcation and nonlinear…
Effect of duration of rubbing and normal load on friction coefficient for polymer and composite materials
Dewan Muhammad Nuruzzaman, Mohammad Asaduzzaman Chowdhury, Mohammad Lutfar RahamanThe present paper seeks to report the effect of duration of rubbing on friction coefficient for different polymer and composite materials. Variations of friction coefficient and…
Prediction of contact surface temperature between rough sliding bodies – numerical analysis and experiments
Sudipto Ray, S.K. Roy ChowdhuryThe paper's aim is to predict numerically the contact temperatures between two rough sliding bodies and to compare with the experimental results.
The wear behaviour of duplex treated AISI 5140 steel
Yasar Totik, Akgun Alsaran, Ayhan Celik, Ihsan EfeogluThis work aims to investigate the wear behavior of manganese phosphate coating on plasma nitrided AISI 5140 steel.
The tribological behaviours of aluminium‐based materials under dry sliding
Erol Feyzullahoğlu, Nehir ŞakiroğluThe purpose of this study is to develop new Al‐based bearing alloys which have better properties than classic commercial bearing materials and to analyze tribologic properties of…
Investigation of properties of ion‐nitrided AISI 304 austenitic‐stainless steel
Mumin Sahin, Ceyhun SevilThe aim is to provide detailed mechanical and metallurgical examinations of ion‐nitrided austenitic‐stainless steels.
Laser bending of steel sheets: corrosion testing of bended sections
Bekir Sami Yilbas, Mazen Khaled, Sohail Akhtar, Cihan KaratasLaser bending is a good candidate to replace the flame bending process. The electrochemical response of laser bending region changes due to the microstructural modifications and…
Influence of non‐Newtonian behavior of lubricant on performance of hole‐entry hybrid journal bearings employing constant flow valve restrictors
H.C. GargThis paper aims to describe the theoretical study concerning the effect of non‐linear behavior of the lubricant on the performance of symmetric constant flow valve compensated…
Friction and wear behaviors of Al‐SiC‐B4C composites produced by pressure infiltration method
U. Soy, A. Demir, F. FindikThe main goal of the present study is to investigate the friction and wear behaviors of aluminum matrix composites with an A360 matrix reinforced with SiC, B4C and SiC/B4C…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz