Index to International Journal of Clothing Science and Technology, Volume 11, 1999

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 1 December 1999

275

Citation

(1999), "Index to International Journal of Clothing Science and Technology, Volume 11, 1999", International Journal of Clothing Science and Technology, Vol. 11 No. 5. https://doi.org/10.1108/ijcst.1999.05811eae.001

Publisher

:

Emerald Group Publishing Limited

Copyright © 1999, MCB UP Limited


Index to International Journal of Clothing Science and Technology, Volume 11, 1999

BAJZåK, V., see MILITKY¨, J.

BETCHEVA, R., see TZANOV, T.

BOND, T., see TURNER, J.P.

BUJAS-DIMITREJEVIC, J., see LIASI, E.

CHEN, Y., COLLIER, B.J. and COLLIER, J.R., Application of cluster analysis to fabric classification, No. 4, pp. 206-215.

CHOI, H.S., see RUCKMAN, J.E.

COLLIER, B.J., see CHEN, Y.

COLLIER, J.R., see CHEN, Y.

DU, R., see LIASI, E.

DU, R., see MALLET, E.

FAN, J., HUI, C.L.P., LU, D. and MacALPINE, J.M.K., Towards the objective evaluation of garment appearance, No. 2/3, pp. 151-9.

FUJIMOTO, T., see KIHARA, M.

HARDALOV, I., see TZANOV, T.

HES, L., Optimisation of shirt fabrics' composition from the point of view of their appearance and thermal comfort, No. 2/3, pp. 105-15.

HOLLAND, E.J., WILSON, C.A., LAING, R.M. and NIVEN, B.E., Microclimate ventilation of infant bedding, No. 4, pp. 226-39.

HUI, C.L.P. and NG, S.F.F., A study of the effect of time variations for assembly line balancing in the clothing industry, No. 4, pp. 181-8.

HUI, C.L.P., see FAN, J.

HUI, C.L.P., see NG, S.F.F.

INOUE, M., see NIWA, M.

KAWABATA, S., NIWA, M. and YAMASHITA, Y., A guide line for manufacturing ''ideal fabrics'', No. 2/3, pp. 134-40.

KAWABATA, S., see NIWA, M.

KHAN, M.R.R., Simulation modeling of a garment production system using a spreadsheet to minimize production cost, No. 5, pp. 287-99.

KIHARA, M., MURAKAMI, M. and FUJIMOTO, T., Effect of mechanical properties of fabrics on change of bloused line during cyclic wear - on front open part made up of fused composites, No. 2/3, pp. 125-33.

KLICKA, V., see MILITKY¨, J.

LAING, R.M., see HOLLAND, E.J.

LAING, R.M., see WILSON, C.A.

LEAF, G.A.V., seee NG, S.F.F.

LIASI, E., DU, R., SIMON, D., BUJAS-DIMITREJEVIC, J. and LIBURDI, F., An experimental study of needle heating in sewing heavy materials using infrared radiometry, Vol. 5, pp. 300-14.

LIBURDI, F., see LIASI, E.

LONG, H.-R., Water transfer properties of two-layer weft knitted fabric, No. 4, pp. 198-205.

LU, D., see FAN, J.

MacALPINE, J.M.K., see FAN, J.

MALLET, E. and DU, R., Finite element analysis of sewing process, No. 1, pp. 19-36.

MIHAILOVIC, T.V., see NIKOLIC¨, M.D.

MILITKY¨, J., RUBNEROVA, J. and KLICKA, V., Surface appearance irregularity of nonwovens, No. 2/3, pp. 141-50.

MILITKY¨, J., TRAVNICKOVA, M. and BAJZAK, V., Air permeability and light transmission of weaves, No. 2/3, pp. 116-24.

MINAMI, H., Effect of the air on the motion of light fabric (the second paper) - the added air mass of a membrane vibrating with fundamental mode, No. 2/3, pp. 83-89.

MURAKAMI, M., see KIHARA, M.

MURRAY, R., see RUCKMAN, J.E.

NAKANISHI, M., see YOKURA, H.,

NG, S.F.F. and HUI, C.L.P., Effect of hem edges on the interface pressure of pressure garments, No. 5, pp. 251-61.

NG, S.F.F., HUI, C.L.P. and LEAF, G.A.V., A mathematical model for predicting fabric loss during spreading, No. 2/3, pp. 76-82.

NG, S.F.F., see HUI, C.L.P.

NIKOLIC¨, M.D., SIMOVIC, L.M. and MIHAILOVIC, T.V., Multiaxial determination of the resistance to creasing of clothing wool fabrics, No. 5, pp. 277-86.

NIVEN, B.E., see HOLLAND, E.J.

NIVEN, B.E., see WILSON, C.A.

NIWA, M., INOUE, M. and KAWABATA, S., The objective evaluation of blanket hand and durability - a preliminary investigation, No. 2/3, pp. 90-104.

NIWA, M., see KAWABATA, S.

NIWA, M., see YOKURA, H.,

RUBNEROVA, J., see MILITKY¨, J.

RUCKMAN, J.E., MURRAY, R. and CHOI, H.S., Engineering of clothing systems for improved thermophysiological comfort: the effect of openings, No. 1, pp. 37-52.

SIMON, D., see LIASI, E.

SIMOVIC, L.M., see NIKOLI¨C, M.D.

STYLIOS, G.K. and WAN, T.R., The concept of virtual measurement: 3D fabric drapeabilty, No. 1, pp. 10-18.

TRAVNICKOVA, M., see MILITKY¨, J.

TURNER, J.P. and BOND, T., Made-to-measure garments for ladies - catering for wide ranging stature and length measurements for standard and outsize ladies, No. 4, pp. 216-25.

TZANOV, T., BETCHEVA, R. and HARDALOV, I., Thermophysiological comfort of silicone softeners-treated woven textile materials, No. 4, pp. 189-97.

WAN, T.R., see STYLIOS, G.K.

WILSON, C.A., HOLLAND, E.J.

WILSON, C.A., NIVEN, B.E. and LAING, R.M., Estimating thermal resistance of the bedding assembly from thickness of materials, No. 5, pp. 262-76.

YAMASHITA, Y., see KAWABATA, S.

YOKURA, H., NAKANISHI, M. and NIWA, M., Using the compression properties of pillows to estimate sleeping comfort, No. 2/3, pp. 160-67.

ZAJACZKOWSKI, J., Vibrations of a crank-shaft in a sewing machine induced by a zigzag mechanism, No. 1, pp. 53-60.

Titles

Air permeability and light transmission of weaves, MILITKY¨, J., TRAVNICKOVA, M. and BAJZAK, V., No. 2/3, pp. 116-24.

Application of cluster analysis to fabric classification, CHEN, Y., COLLIER, B.J. and COLLIER, J.R., No. 4, pp. 206-15.

(The) concept of virtual measurement: 3D fabric drapeabilty, STYLIOS, G.K. and WAN, T.R., No. 1, pp. 10-18.

Effect of hem edges on the interface pressure of pressure garments, NG, S.F.F. and HUI, C.L.P., No. 5, pp. 251-61.

Effect of mechanical properties of fabrics on change of bloused line during cyclic wear - on front open part made up of fused composites, KIHARA, M., MURAKAMI, M. and FUJIMOTO, T., No. 2/3, pp. 125-33.

Effect of the air on the motion of light fabric (the second paper) - the added air mass of a membrane vibrating with fundamental mode, MINAMI, H., No. 2/3, pp. 83-9.

Engineering of clothing systems for improved thermophysiological comfort: the effect of openings, RUCKMAN, J.E., MURRAY, R. and CHOI, H.S., No. 1, pp. 37-52.

Estimating thermal resistance of the bedding assembly from thickness of materials, WILSON, C.A., NIVEN, B.E. and LAING, R.M., No. 5, pp. 262-76.

(An) experimental study of needle heating in sewing heavy materials using infrared radiometry, LIASI, E., DU, R., SIMON, D., BUJAS-DIMITREJEVIC, J. and LIBURDI, F., Vol. 5, pp. 300-14.

Finite element analysis of sewing process, MALLET, E. and DU, R., No. 1, pp. 19-36.

(A) guide line for manufacturing ''ideal fabrics'', KAWABATA, S., NIWA, M. and YAMASHITA, Y., No. 2/3, pp. 134-40.

Made-to-measure garments for ladies - catering for wide ranging stature and length measurements for standard and outsize ladies, TURNER, J.P. and BOND, T., No. 4, pp. 216-25.

(A) mathematical model for predicting fabric loss during spreading, NG, S.F.F., HUI, C.L.P. and LEAF, G.A.V., No. 2/3, pp. 76-82.

Microclimate ventilation of infant bedding, HOLLAND, E.J., WILSON, C.A., LAING, R.M. and NIVEN, B.E., No. 4, pp. 226-39.

Multiaxial determination of the resistance to creasing of clothing wool fabrics, NIKOLIC¨, M.D., SIMOVIC, L.M. and MIHAILOVIC, T.V., No. 5, pp. 277-86.

(The) objective evaluation of blanket hand and durability - a preliminary investigation, NIWA, M., INOUE, M. and KAWABATA, S., No. 2/3, pp. 90-104.

Optimisation of shirt fabrics' composition from the point of view of their appearance and thermal comfort, HES, L., No. 2/3, pp. 105-15.

Simulation modeling of a garment production system using a spreadsheet to minimize production cost, KHAN, M.R.R., No. 5, pp. 287-99.

(A) study of the effect of time variations for assembly line balancing in the clothing industry, HUI, C.L.P. and NG, S.F.F., No. 4, pp. 181-8.

Surface appearance irregularity of nonwovens, MILITKY¨, J., RUBNEROVA, J. and KLICKA, V., No. 2/3, pp. 141-50.

Thermophysiological comfort of silicone softeners-treated woven textile materials, TZANOV, T., BETCHEVA, R. and HARDALOV, I., No. 4, pp. 189-97.

Towards the objective evaluation of garment appearance, FAN, J., HUI, C.L.P., LU, D. and MacALPINE, J.M.K., No. 2/3, pp. 151-9.

Using the compression properties of pillows to estimate sleeping comfort, YOKURA, H., NAKANISHI, M. and NIWA, M., No. 2/3, pp. 160-67.

Vibrations of a crank-shaft in a sewing machine induced by a zigzag mechanism, ZAJACZKOWSKI, J., No. 1, pp. 53-60.

Water transfer properties of two-layer weft knitted fabric, LONG, H.-R., No. 4, pp. 198-205.

Related articles