To read the full version of this content please select one of the options below:

Corrosion Tests in Germany: Tentative Standard Methods laid down by the Aluminium Board of the Reichsauschuss für Metallschultz

Georg Goldbach (Assistant in the Corrosion Department of the D.V.L.)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 1 August 1931

Abstract

IN all corrosion tests, it should be noticed carefully that both the material and the attacking agent conform fully to service conditions. A section, for instance, must be tested in such a way that the specimens necessary for the tensile tests are taken from the sample pieces only after finishing the corrosion test.

Citation

Goldbach, G. (1931), "Corrosion Tests in Germany: Tentative Standard Methods laid down by the Aluminium Board of the Reichsauschuss für Metallschultz", Aircraft Engineering and Aerospace Technology, Vol. 3 No. 8, pp. 195-196. https://doi.org/10.1108/eb029435

Publisher

:

MCB UP Ltd

Copyright © 1931, MCB UP Limited