Free Orbital Welding Parameter Calculator

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 1 August 2004

Citation

(2004), "Free Orbital Welding Parameter Calculator", Aircraft Engineering and Aerospace Technology, Vol. 76 No. 4. https://doi.org/10.1108/aeat.2004.12776dab.008

Publisher

:

Emerald Group Publishing Limited

Copyright © 2004, Emerald Group Publishing Limited


Free Orbital Welding Parameter Calculator

Free Orbital Welding Parameter Calculator

Orbimatic GmbH is offering a completely free Parameter Calculator which will allow users of ANY orbital welding system to obtain good base figures for entry into their orbital welding system to obtain good results with minimal effort.

The Orbital Welding Parameter Calculator uses Microsoft Excel as a base and will give parameters for tube welding with wall thicknesses up to 4 mm and needs only the tube outside diameter and wall thickness to be entered. The operator can choose between the use of a synchronised or continuous pulsing pattern and the calculator provides recommended figures to both.

To get a copy of this calculator simply send your e-mail address and the make and model of your equipment to Orbimatic and they will ensure you get the correct version of the calculator.

To obtain a copy of the Orbital Welding Parameter calculator, contact: Orbimatic GmbH. Tel: 01733 244063; Fax: 01733 244463; E-mail: info@orbimatic.co.uk