Aircraft positioning using DGNSS technique for GPS and GLONASS data

Abstract

Purpose

The purpose of this paper is to present the problem of implementation of the differential global navigation satellite system (DGNSS) differential technique for aircraft accuracy positioning. The paper particularly focuses on identification and an analysis of the accuracy of aircraft positioning for the DGNSS measuring technique.

Design/methodology/approach

The investigation uses the DGNSS method of positioning, which is based on using the model of single code differences for global navigation satellite system (GNSS) observations. In the research experiment, the authors used single-frequency code observations in the global positioning system (GPS)/global navigation satellite system (GLONASS) system from the on-board receiver Topcon HiperPro and the reference station REF1 (reference station for the airport military EPDE in Deblin in south-eastern Poland). The geodetic Topcon HiperPro receiver was installed in Cessna 172 plane in the aviation test. The paper presents the new methodology in the DGNSS solution in air navigation. The aircraft position was estimated using a “weighted mean” scheme for differential global positioning system and differential global navigation satellite system solution, respectively. The final resultant position of aircraft was compared with precise real-time kinematic – on the fly solution.

Findings

In the investigations it was specified that the average accuracy of positioning the aircraft Cessna 172 in the geocentric coordinates XYZ equals approximately: +0.03 ÷ +0.33 m along the x-axis, −0.02 ÷ +0.14 m along the y-axis and approximately +0.02 ÷ −0.15 m along the z-axis. Moreover, the root mean square errors determining the measure of the accuracy of positioning of the Cessna 172 for the DGNSS differential technique in the geocentric coordinates XYZ, are below 1.2 m.

Research limitations/implications

In research, the data from GNSS onboard receiver and also GNSS reference receiver are needed. In addition, the pseudo-range corrections from the base stations were applied in the observation model of the DGNSS solution.

Practical implications

The presented research method can be used in a ground based augmentation system (GBAS) augmentation system, whereas the GBAS system is still not applied in Polish aviation.

Social implications

The paper is destined for people who work in the area of aviation and air transport.

Originality/value

The study presents the DGNSS differential technique as a precise method for recovery of aircraft position in civil aviation and this method can be also used in the positioning of aircraft based on GPS and GLONASS code observations.

Citation

Krasuski, K. and Ćwiklak, J. (2020), "Aircraft positioning using DGNSS technique for GPS and GLONASS data", Sensor Review, Vol. 40 No. 5, pp. 559-575. https://doi.org/10.1108/SR-12-2018-0327