Implementing an integrated maintenance management system for monitoring production lines: a case study for biscuit industry
Journal of Quality in Maintenance Engineering
ISSN: 1355-2511
Article publication date: 13 October 2020
Issue publication date: 11 February 2022
Abstract
Purpose
This study provides a unique integrated diagnosis system to investigate the causes of low productivity, profitability, machinery health conditions and wear severity of medium-size biscuit industry assets in Taiz, Yemen.
Design/methodology/approach
The evaluation is based on an integrating of the overall equipment effectiveness (OEE) and oil-based maintenance (OBM) approaches. The data are collected using the company's operational records, interviews and observations, while the used lubricating oil samples are also collected from production lines' machineries. Scanning electron microscope (SEM) is used to study the wear debris particle features and wear mechanism. Different other analysis tools such as fishbone, 5 whys and Pareto charts are also used to investigate the root causes and plausible recovery solutions of machinery failures.
Findings
This study demonstrated that a large proportion of machinery failures and production loss are of management concerns. Also, this study inferred that the analysis of wear debris is unique and informative for determining machinery wear severity and useful life. Finally, the current conditions of production lines are clarified and suggestions to use a mixed preventive/predictive maintenance management approach are also elucidated.
Originality/value
This work implemented an integrated OEE/OBM diagnostic maintenance system to investigate the root causes of low productivity and machine failures in real production lines and suggested robust decisions on the maintenance duties.
Keywords
Acknowledgements
The authors thank Yemen Lubricant Manufacturing Co. Ltd., Taiz, for allowing them to conduct the oil analysis measurements. The authors also thank Prof. Ahmed Al-Fatish, Department of Chemical Engineering, King Saud University, for doing SEM analysis.
Citation
Amrani, M.A., Alhomdi, M., Aswaidy M, B., Ghaleb, A.M., Al-Qubati, M. and Shameeri, M. (2022), "Implementing an integrated maintenance management system for monitoring production lines: a case study for biscuit industry", Journal of Quality in Maintenance Engineering, Vol. 28 No. 1, pp. 180-196. https://doi.org/10.1108/JQME-06-2020-0049
Publisher
:Emerald Publishing Limited
Copyright © 2020, Emerald Publishing Limited