Renovation in hospitals: a case study on the use of control cubes for local repairs in health-care facilities

Abstract

Purpose

The purpose of this study is to evaluate the effectiveness of the control cubes for dust control in health-care facilities. Research shows that more than 80% of pathogenic agents in hospitals are spread into the air, where they either remain airborne or deposit on the surface. At the same time, renovation and repair activities, including regular maintenance, are a necessity in active health-care facilities and a multitude of studies have documented their impact on indoor air quality. The dust that is generated by construction activities may potentially carry pathogenic agents, varying from coarse particles (≤10 µm, PM10) to fine particles (≤2.5 µm, PM2.5), including airborne bacteria, and fungal spores linked to high patient mortality in immune-compromised patients.

Design/methodology/approach

This study measures the impact and effectiveness of one such preventative measure, namely, the control cube (CC), on air quality during renovation and repair. CC is a temporary structure, typically made from stainless steel, around the local repair zone to minimize the spread of dust and potential microorganisms. The current paper presents a comparative analysis to identify the effectiveness of a CC equipped with the high-efficiency particulate filtration (HEPA) filter in a hospital setting by simulating construction renovation and repair work.

Findings

A baseline was established to measure the effectiveness of CCs and the impact of negative pressure on the indoor air quality in a hospital during simulated renovation work. Results showed that CCs are very effective in minimizing the spread of dust due to construction activities in the hospital. However, it is imperative to ensure that the air inside the CC is cleaned via filtration.

Originality/value

CCs are very effective, and this paper investigates the best approach for facility managers to implement this strategy.

Citation

Mousavi, E., Sharma, V., Gajjar, D. and Shoai Naini, S. (2020), "Renovation in hospitals: a case study on the use of control cubes for local repairs in health-care facilities", Journal of Facilities Management, Vol. 18 No. 3, pp. 247-257. https://doi.org/10.1108/JFM-02-2020-0009