Research on wireless nondestructive monitoring method for film pressure of water-lubricated bearing
Abstract
Purpose
The purpose of this paper is to provide a nondestructive monitoring method based on wireless sensor technology to measure the continuous circumferential film pressure on radial cross-section of water-lubricated bearing, in addition, to study the influence factors to wireless communication.
Design/methodology/approach
The unique shaft and wireless equipments are designed, the pressure sensors are installed in right shoulder of shaft, the wireless transmitter is installed at the end of shaft and the sensors are connected with wireless transmitter by data cable. By this way, the film pressure can be obtained via wireless communication. The film pressure of eight grooved water-lubricated rubber bearings with concave staves is measured, the performance evaluation of wireless equipments is conducted and the influence factors to wireless communication is analyzed by Doppler frequency shift theory.
Findings
The rupturing and nonuniform water film is observed, the grooves decrease the film pressure of rubber bearing which is in mixed lubricating state. The main influence factor to wireless communication is shaft speed which has greater effect on packet loss rate than that on bit error rate.
Practical implications
By studying the actual continuous water film pressure, the bearing properties can be studied in-depth, and this has significant meaning to the design and application of bearing. Moreover, the study on influence factors to wireless communication can be used for references to other wireless monitoring on rotating machinery.
Originality/value
The continuous water film pressure can be monitored by this method, the lubricating state of bearing working surface cannot be damaged and the signal attenuation can be avoided. Therefore, the measuring accuracy is promoted and the measuring process also becomes convenient and high efficiency.
Keywords
Acknowledgements
This work was funded by the National Basic Research Program of China (NO.2009CB724304) and the National Science Foundation of China (NO.51275380). The authors would like to thank the reviewers for their valuable comments on this paper.
Citation
Wang, N. and Meng, Q. (2015), "Research on wireless nondestructive monitoring method for film pressure of water-lubricated bearing", Industrial Lubrication and Tribology, Vol. 67 No. 4, pp. 349-358. https://doi.org/10.1108/ILT-08-2014-0079
Publisher
:Emerald Group Publishing Limited
Copyright © 2015, Emerald Group Publishing Limited