Preparation and evaluation of tribological properties of oil-soluble rice-like CuO nanoparticles

Abstract

Purpose

The purpose of this paper is synthesis of oil-soluble non-spherical nanoparticles modified with free phosphorus and sulphur modifier and investigation of their tribological properties as environment-friendly lubricating oil additives.

Design/methodology/approach

To study the effect of morphology of nanoparticles on their tribological properties, rice-like CuO nanoparticles were synthesized. To improve the solubility of CuO nanoparticles in organic media, the in-situ surface modification method was used to synthesize these products. The morphology, composition and structure of as-synthesized CuO nanoparticles were investigated by means of transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis and Fourier transform infrared spectrometry. The tribological properties of as-synthesized CuO nanoparticles as an additive in liquid paraffin (LP) were evaluated with a four-ball tribometer. The morphology and elemental composition of worn steel ball surfaces were analysed by X-ray photoelectron spectroscopy.

Findings

It has been found that as-synthesized CuO nanoparticles with rice-like morphology have an average size of 7 and 15 nm along the shorter axle and longer axle, respectively, and can be well-dispersed in LP. Tribological properties evaluation results show that as-synthesized CuO nanoparticles as additives in LP show good friction-reducing, anti-wear and load-carrying capacities, especially under a higher normal load.

Originality/value

Oil-soluble rice-like CuO nanoparticles without phosphorus and sulphur were synthesized and their tribological properties as lubricating oil additives were also investigated in this paper. These results could be very helpful for application of CuO nanoparticles as environment-friendly lubricating oil additives, owing to their free phosphorus and sulphur elements characteristics.

Citation

Liu, H., Zhang, Y., Zhang, S., Chen, Y., Zhang, P. and Zhang, Z. (2015), "Preparation and evaluation of tribological properties of oil-soluble rice-like CuO nanoparticles", Industrial Lubrication and Tribology, Vol. 67 No. 3, pp. 276-283. https://doi.org/10.1108/ILT-08-2013-0092