To read this content please select one of the options below:

Ergonomic assessment of working postures in clothing sector with scientific observation methods

Meral Isler (Faculty of Art and Design, Selçuk University, Konya, Turkey)
Mehmet Küçük (Department of Textile Engineering, Engineering Faculty, Ege University, Izmir, Turkey)
Mücella Guner (Department of Textile Engineering, Engineering Faculty, Ege University, Izmir, Turkey)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 17 October 2018

Issue publication date: 18 October 2018

825

Abstract

Purpose

The purpose of this paper is to comparatively examine the personnel working in the clothing sector by examining them in three different methods in order to determine the working postures, identification of the stress factors of musculoskeletal system and the exposures depending on the working postures. Methods used in the study, REBA (Hignett and McAtamney, 2000), Ovako Working Posture Analyzing System (OWAS) (Karhu et al., 1977) and PLIBEL (Kemmlert, 1995) are the scientific observation-based methods. Within the scope of this study, the working stations and the working postures of the operators who work in the clothing sector were examined and their movements that could cause harm to the body were examined and in conclusion some suggestions were suggested to prevent these movements.

Design/methodology/approach

Due to the standard unit of times in clothing sector are short and the work done is very repetitive, 30 min recording was thought as enough for each operator examined. These recorded videos were then divided into 30 s photographs to obtain the poses of the operators’ working postures. In the scope of the research, first, the PLIBEL observation form was filled as the PLIBEL method is more general one. According to the working postures, the body regions which are damaged or can be damaged were identified and the PLIBEL form was filled in the consideration of the risk factors in the form (Malchaire 2011). In addition, the photographs were also analyzed with REBA and OWAS methods for having more quantitative and detailed results.

Findings

The working postures of the operators who work in the cutting, sewing, ironing, quality control and packaging departments of six clothing companies were examined in the scope of this research with PLIBEL, REBA and OWAS methods in terms of ergonomy. The results belonging to each department were given separately. REBA and OWAS methods have been applied in order to investigate the working postures in more detail due to the lack of providing numerical data of the PLIBEL method. The reliability of the study has been approved with obtaining the similar results from the REBA and OWAS methods. According to Table VIII, both of the methods show that all the departments in question need ergonomic arrangements. It was analyzed that the cutting department is in the first place which needs ergonomic arrangement immediately (REBA %90.58, OWAS %87.69).

Practical implications

This study is composed of 65 operators who have experience between 5 and 22 years and in the age range of 22–43 working in the cutting, sewing, ironing, quality control and packaging departments in eight different clothing companies. These 65 operators were recorded by video camera during their work. The recording time were selected randomly. The movements of operators during their own work have been taken into consideration.

Originality/value

This paper indicates the usability of the PLIBEL, OWAS and REBA methods in clothing sector. Using these methods in clothing sectors states the value and the originality of this paper.

Keywords

Acknowledgements

This study was prepared with the help of 11-MÜH-053 ID project which was supported by Ege University Scientific Research Projects Department.

Citation

Isler, M., Küçük, M. and Guner, M. (2018), "Ergonomic assessment of working postures in clothing sector with scientific observation methods", International Journal of Clothing Science and Technology, Vol. 30 No. 6, pp. 757-771. https://doi.org/10.1108/IJCST-06-2017-0084

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles