A distributed and integrated method for cooperative mission planning of multiple heterogeneous UAVs
Aircraft Engineering and Aerospace Technology
ISSN: 0002-2667
Article publication date: 15 October 2018
Issue publication date: 22 November 2018
Abstract
Purpose
The purpose of this paper is to develop a distributed and integrated method to get a fast and feasible solution for cooperative mission planning of multiple heterogeneous unmanned aerial vehicles (UAVs).
Design/methodology/approach
In this study, the planning process is conducted in a distributed framework; the cooperative mission planning problem is reformulated with some specific constraints in the real mission; a distributed genetic algorithm is the algorithm proposed for searching for the optimal solution; genes of the chromosome are modified to adapt to the heterogeneous characteristic of UAVs; a fixed-wing UAV’s six degrees-of-freedom (DOF) model with a path following method is used to test the proposed mission planning method.
Findings
This method not only has the ability to obtain good feasible solutions but also improves the operating rate vastly.
Research limitations/implications
This study is only applied to the case where the communication among UAVs is linked during the mission.
Practical implications
This study is expected to be practical for a real mission because of its fast operating rate and good feasible solution.
Originality/value
This solution is tested on a fixed-wing UAV’s 6-DOF model by a path following method, so it is believable from the perspective of an autonomous UAV guidance and control system.
Keywords
Citation
WU, W. and Cui, N. (2018), "A distributed and integrated method for cooperative mission planning of multiple heterogeneous UAVs", Aircraft Engineering and Aerospace Technology, Vol. 90 No. 9, pp. 1403-1412. https://doi.org/10.1108/AEAT-05-2017-0124
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited