To read this content please select one of the options below:

Inhibitive action of tara tannin in rust converter formulation

Santiago Flores Merino (Instituto de Corrosión y Protección, Pontificia Universidad Católica del Perú, Lima, Perú)
Juan José Caprari (Centro de Investigación y Desarrollo en Tecnología de Pinturas (CIDEPINT), La Plata, Argentina)
Luis Vasquez Torres (Pontificia Universidad Católica del Perú, Lima, Perú)
Luis Figueroa Ramos (Instituto de Corrosión y Protección, Pontificia Universidad Católica del Perú, Lima, Perú)
Antonella Hadzich Girola (Instituto de Corrosión y Protección, Pontificia Universidad Católica del Perú, Lima, Perú)

Anti-Corrosion Methods and Materials

ISSN: 0003-5599

Article publication date: 6 March 2017

312

Abstract

Purpose

The purpose of this paper is to study the ability of commercial tara powder to convert rust into iron tannate and evaluate their use as raw material for the formulation of water based rust converter.

Design/methodology/approach

Water-borne acrylic primers were formulated with tara powder and aqueous tara extract and applied on steel rusted by three different methods. The conversion of rusted steel by tara tannins was studied by X-ray diffraction spectroscopy, infrared spectroscopy and scanning electron microscopy. The acrylic primers, containing hydrolysable tannins, were coated with alkyd finish and were evaluated in comparison to commercial systems in accelerated corrosion tests. The corrosion inhibition effects of tara powder on mild steel in 0.1M NaCl were studied by DC electrochemical techniques.

Findings

Tara tannin converts rust to ferric tannate and increases the magnetite content of rusted steel. The water-based acrylic primer formulated with aqueous extract of tara, alkyd-coated finish, showed performance equivalent to pure alkyd system.

Research limitations/implications

The chlorides content in the commercial tara powder can be screened the beneficial effect of hydrolysable tannins to convert rust. Furthermore, the water-based rust converter formulated with acrylic resin may be sensitive to salt contamination of rust.

Originality/value

Hydrolysable tannins from commercial tara powder have not been studied yet in its application to the development of rust converters. A water-based primer formulated with commercial tara powder developed for the effective treatment of rusted surfaces can be of interest as an environmentally friendly to current commercial approaches.

Keywords

Acknowledgements

The authors wish to thank the Research Management Division of the Pontificia Universidad Católica del Perú (PUCP) for funding this study and the Institute of Corrosion and Protection (ICP-PUCP) for providing the resources and infrastructure needed.

Citation

Flores Merino, S., Caprari, J.J., Vasquez Torres, L., Figueroa Ramos, L. and Hadzich Girola, A. (2017), "Inhibitive action of tara tannin in rust converter formulation", Anti-Corrosion Methods and Materials, Vol. 64 No. 2, pp. 136-147. https://doi.org/10.1108/ACMM-06-2015-1548

Publisher

:

Emerald Publishing Limited

Copyright © 2017, Emerald Publishing Limited

Related articles