The combined erosion and corrosion resistance of WC-Ni vacuum brazed coating
Abstract
Purpose
The purpose of this paper is to investigate the combined erosion and corrosion behavior of WC-Ni vacuum brazed coating.
Design/methodology/approach
Al2O3 particles and 10 wt% NaCl solution are used to evaluate erosion and corrosion resistance of WC-Ni vacuum brazed coating. Combined test of erosion and corrosion is also conducted. The microstructure of each specimen is characterized by the scanning electron microscopy. The chemical composition was determined by energy-dispersive X-ray spectroscopy.
Findings
WC-Ni vacuum brazed coating layer is effective protective coating under combined erosion and corrosion environment. The weight loss of coating layer is more reduced as the cumulative test time.
Originality/value
WC-Ni vacuum brazed coatings are investigated to check characteristic of the combined erosion and corrosion environment. WC-Ni vacuum brazed coatings are kind of diffusion coating that attract attention because of the resistance of superb impact and corrosion in comparison with other coatings. Some previous researches reported the properties of vacuum brazed WC material. Erosion and corrosion behaviors of WC-Ni vacuum brazed coatings were studied in our previous research, respectively. Hence, in this research, the principal objective is to examine the combined erosion and corrosion behavior of WC-Ni vacuum brazed coating.
Keywords
Citation
Joo, H.G., Lee, K.Y., Luo, G.M. and Zhang, D.Q. (2017), "The combined erosion and corrosion resistance of WC-Ni vacuum brazed coating", Anti-Corrosion Methods and Materials, Vol. 64 No. 6, pp. 626-633. https://doi.org/10.1108/ACMM-02-2017-1761
Publisher
:Emerald Publishing Limited
Copyright © 2017, Emerald Publishing Limited