To the correction of analytical models for computer based communication systems

Abstract

Purpose

This paper considers correction aspects of computer communication networks modelling with emphasis on their performance evaluation. In general, the problem is to achieve the highest possible performance given constraints on the system.

Design/methodology/approach

The paper reviews the application of the analytical methods, based on the queueing theory, to the computer communication systems and makes an extension of theory to the improvement of the developed analytical models. In this sense the paper describes the derivation of a correction factor for analytical models to study more precise their basic parameters (end‐to‐end delay, performance, etc.).

Finding

The contribution is in incorporating the derived correction factor to account for the real non‐exponential nature of the input to the transmission channels of computer communication systems. The produced results by corrected analytical model are compared with results previously reported in the literature to estimate the magnitude of improvement.

Practical implications

The improved analytical models were tested under various ranges of parameters, which influence the architecture of the computer communication networks and which are important for practical use.

Research limitations/implications

The rapid rate of growth of computer‐based communication systems (e.g. distributed computer networks, mobile data networks) has resulted in a renewed and intensive interest in this area. Efficient design of their service facilities leads to the sharing of resources among users. Such public shared networks are largely oversubscribed by independent users, which make random demands on the network resources. The optimal resource allocation to satisfy such demands and the proper settlement of contention when demands exceed the capacity of the resources, constitute the problem of being able to understand and to predict system behaviour.

Originality/value

To behaviour analysis we can use both analytical and simulation methods. Modelling and simulation are methods, which are commonly used by performance analysts to represent constraints and optimise performance. Principally the application of analytical queuing theory results belongs to the preferred method in comparison to the simulation method, because of their ability to analyse also very large networks.

Citation

Hanuliak, M. and Hanuliak, I. (2006), "To the correction of analytical models for computer based communication systems", Kybernetes, Vol. 35 No. 9, pp. 1492-1504. https://doi.org/10.1108/03684920610688504