On the optimization of composite laminated plates

Abstract

This paper deals with the optimum design of composite laminated plates. Both ply orientation angles and ply thicknesses of the composite plate are used as design variables. The optimum design process is divided into two sublevels. In the first sublevel, the strain energy of the plate is minimized by changing the ply orientation angles while the ply thickness distributions remain unmodified. In the second sublevel, with the angle values obtained in the first sublevel, the optimum thickness distribution of each ply is obtained by minimizing the structural weight while satisfying stiffness and gauge constraints. The final optimum design is achieved by iterating between these two sublevels. The stiffness analysis is performed by the finite element method in which a triangular element is used that is suitable for from thin to thick plates and includes the transverse shear effects. All the derivative analysis is performed analytically. The mathematical programming method called Constrained Variable Metric is used to solve the optimum problem. An example is provided for a rectangular laminated plate with good results to show the effectiveness of the method.

Citation

Huang, C. and Kröplin, B. (1995), "On the optimization of composite laminated plates", Engineering Computations, Vol. 12 No. 5, pp. 403-414. https://doi.org/10.1108/02644409510799712