Search results

The dynamic response of the nuclear power plants (NPPs) with pile foundation reinforcement have not yet been systemically investigated in detail. Thus, there is an urgent need to improve evaluation methods for nonlithological foundation reinforcements, as this issue is bound to become an unavoidable task.

A nonlinear seismic wave input method is adopted to consider both a nonlinear viscoelastic artificial boundary and the nonlinear properties of the overburden layer soil. Subsequently, the effects of certain vital parameters on the structural response are analyzed.

A suitable range for the size of the overburden foundation is suggested. Then, when piles are used to reinforce the overburden foundation, the peak frequencies in the floor response spectra (FRS) in the horizontal direction becomes higher (38%). Finally, the Poisson ratio of the foundation soil has a significant influence on the FRS peak frequency in the vertical direction (reduce 35%–48%).

The quantifiable results are performed to demonstrate the seismic responses with respect to key design parameters, including foundational dimensions, the Poisson Ratio of the soil and the depth of the foundation. The results can help guide the development of seismic safety requirements for NPPs.

This paper aims to investigate the responses of single piles and pile groups due to tunneling-induced ground movements in a two-layered soil system. The analyses mainly focus on the additional single pile responses in terms of bending moment, lateral deflection, axial force, shaft resistance and pile settlement. Subsequently, a series of parametric studies were carried out to better understand the responses of single piles induced by tunneling. To give further understanding regarding the pile groups, a 2 × 2 pile group with two different pile head conditions, namely, free and capped, was considered.

Using the PLAXIS three-dimensional (3D) software, a full 3D numerical modeling is performed to investigate the effects of ground movements caused by tunneling on adjacent pile foundations. The numerical model was validated using centrifuge test data found in the literature. The relevance of the 3D model is also judged by comparison with the 2D plane strain model using the PLAXIS 2D code.

The numerical test results reveal that tunneling induces significant displacements and internal forces in nearby piles. The magnitude and distribution of internal forces depend mainly on the position of the pile toe relative to the tunnel depth and the distance between the pile and the vertical axis of the tunnel. As the volume loss increases from 1% to 3%, the apparent loss of pile capacity increases from 11% to 20%. By increasing the pile length from 0.5 to 1.5 times, the tunnel depth, the maximum pile settlement and lateral deflection decrease by about 63% and 18%, respectively. On the other hand, the maximum bending moment and axial load increase by about 7 and 13 times, respectively. When the pile is located at a distance of 2.5 times the tunnel diameter (Dt), the additional pile responses become insignificant. It was found that an increase in tunnel depth from 1.5Dt to 2.5Dt (with a pile length of 3Dt) increases the maximum lateral deflection by about 420%. Regarding the interaction between tunneling and group of piles, a positive group effect was observed with a significant reduction of the internal forces in rear piles. The maximum bending moment of the front piles was found to be higher than that of the rear piles by about 47%.

Soil is a complex material that shows differently in primary loading, unloading and reloading with stress-dependent stiffness. This general behavior was not possibly being accounted for in simple elastic perfectly plastic Mohr–Coulomb model which is often used to predict the behavior of soils. Thus, in the present study, the more advanced hardening soil model with small-strain stiffness (HSsmall) is used to model the non-linear stress–strain soil behavior. Moreover, unlike previous studies THAT are usually based on the assumption that the soil is homogeneous and using numerical methods by decoupled loadings under plane strain conditions; in this study, the pile responses have been exhaustively investigated in a two-layered soil system using a fully coupled 3D numerical analysis that takes into account the real interactions between tunneling and pile foundations. The paper presents a distinctive set of findings and insights that provide valuable guidance for the design and construction of shield tunnels passing through pile foundations.

The theoretical study, presented here, deals with the problem of interaction pile soil, thus making a contribution in determining the resistance and friction edge side for a single stake sought by a charge axial static. The theoretical tool used is the theorem cinematic theory analysis limit, in the case of a material Coulomb, developing a model in three dimensions. The aim of this research is to determine the limit load massive breakdown by the model proposed using the computer code mathcad. The calculation program takes into account physical phenomena, ie the expansion and contraction of soil under a load static. The results, calculated by the proposed model are compared with experimental results made in the laboratory 3SR Grenoble (France) and the results of conventional methods used in the calculations of this type of constructions.

To solve the instability problem of Zhangjiayao landslide caused by rainfall, the internal mechanism of slope instability and the supporting effect of anti-slide piles are studied. The research results can provide theoretical basis for the prevention and control of loess landslides.

A three-dimensional finite element model of Zhangjiayao landslide is established by field geological survey, laboratory test and numerical simulation.

The results show that Zhangjiayao landslide is a loess-mudstone contact surface landslide, and rainfall leads to slope instability and traction landslide. The greater the rainfall intensity, the faster the pore water pressure of the slope increases and the faster the matrix suction decreases. The longer the rainfall duration, the greater the pore water pressure of the slope and the smaller the matrix suction. Anti-slide pile treatment can significantly improve slope stability. The slope safety factor increases with the increase of embedded depth of anti-slide pile and decreases with the increase of pile spacing.

Based on the unsaturated soil seepage theory and finite element strength reduction method, the failure mechanism of Zhangjiayao landslide was revealed, and the anti-slide pile structure was optimized and designed based on the pile-soil interaction principle. The research results can provide theoretical basis for the treatment of loess landslides.

1. A three-dimensional finite element model of Zhangjiayao landslide is established.

2. Zhangjiayao landslide is a loess-mudstone contact surface landslide.

3. The toe of Zhangjiayao slope is first damaged by heavy rainfall, resulting in traction landslide.

4. The deformation of Zhangjiayao slope is highly dependent on rainfall intensity and duration.

5. The anti-slide pile can effectively control the continuous sliding of Zhangjiayao slope.

A three-dimensional finite element model of Zhangjiayao landslide is established.

Zhangjiayao landslide is a loess-mudstone contact surface landslide.

The toe of Zhangjiayao slope is first damaged by heavy rainfall, resulting in traction landslide.

The deformation of Zhangjiayao slope is highly dependent on rainfall intensity and duration.

The anti-slide pile can effectively control the continuous sliding of Zhangjiayao slope.

The purpose of this study is to find the optimum design of Reinforced Concrete (RC) pile foundation to enable efficient use of structural concrete with greater consequences for global environment and economy.

A non-linear optimisation technique based on the Generalised Reduced Gradient (GRG) algorithm was implemented to find the minimum cost of RC pile foundation in frictional soil. This was achieved by obtaining the optimum pile satisfying the serviceability and ultimate limit state requirements of BS 8004 and EC 7. The formulated structural optimisation procedure was applied to a case study project to assess the efficiency of the proposed design formulation.

The results prove that the GRG method in Excel solver is an active, fast, accurate and efficient computer programme to obtain optimum pile design. The application of the optimisation for the case study project shows up to 26% cost reduction compared to the conventional design.

The design and formulation of design constraints will be limited to provisions of BS 8004 and EC 7.

Since the minimum quantity of concrete was attained through optimisation, then minimum cement will be used and thus result in minimum CO₂ emission. Therefore, the optimum design of concrete structures is a vital solution to limit the damage to the Earth's climate and the physical environment resulting from high carbon emissions.

The current study considers the incorporation of different soil ground parameters in the optimisation process rather than assuming any pile capacity value for the optimisation process.

The purpose of this paper is to develop a concurrent multiscale computational method for granular materials in the quasi-static loading regime.

Overlapped-coupling between a micropolar linear elastic one-dimensional (1D) mixed finite element (FE) model and a 1D chain of Hertzian nonlinear elastic, glued, discrete element (DE) spheres is presented. The 1D micropolar FEs and 1D chain of DEs are coupled using a bridging-scale decomposition for static analysis.

It was found that an open-window DE domain may be coupled to a micropolar continuum FE domain via an overlapping region within the bridging-scale decomposition formulation for statics. Allowing the micropolar continuum FE energy in the overlapping region to contribute to the DE energy has a smoothing effect on the DE response, especially for the rotational degrees of freedom (dofs).

The paper focusses on 1D examples, with elastic, glued, DE spheres, and a linear elastic micropolar continuum implemented in 1D.

A concurrent computational multiscale method for granular materials with open-window DE resolution of the large shearing region such as at the interface with a penetrometer skin, will allow more efficient computations by reducing the more costly DE domain calculations, but not at the expense of generating artificial boundary effects between the DE and FE domains.

Open-window DE overlapped-coupling to FE continuum domain, accounting for rotational dofs in both DE and FE methods. Contribution of energy from micropolar FE in overlap region to underlying DE particle energy.

Delays in projects execution due to improper structural design lead to substantial losses to the owners. Little guidelines are available in practice that deals with structural design of Delayed Coker Units (DCUs). This work describes effective structural criteria for design of DCU used in hydrocarbon industry. Economical procedures are described for steel and concrete design. Design of pump houses supporting DCU is also described.

Numerical procedures are developed to model pipelines and mechanical equipment loadings. Soil restraints are simulated using horizontal and vertical springs along the pile embedded length. Concrete pile-caps are integrated with steel structure in the analysis model.

The proposed design approach is cost effective to use in practice. The paper offers economical footprint for design of DCUs that can be used for multiple projects.

The paper provides useful guidelines that can be utilized by engineers for design of coker heater and coker fractionation stacks, steel modules, coke pump house, deluge building, etc.

Currently, there are no guidelines in practice that deal with structural design of DCU. The present work bridges this gap and describes novel strategies that can be utilized for industrial projects.

For coastal bridges, the ability to recover traffic functions after the earthquake has crucial implications for post-disaster reconstruction, which makes resilience become a significant index to evaluate the seismic behavior. However, the deterioration of the material is particularly prominent in coastal bridge, which causes the degradation of the seismic behavior. As far, the research studies on resilience of coastal bridges considering multiple degradation factors and different disaster prevention capability are scarce. For further evaluating the seismic behavior of coastal bridge in the long-term context, the seismic resilience is conducted in this paper with considering multiple durability damage.

The fuzzy theory and time-varying fragility analysis are combined in this paper to obtain the life-cycle resilience of coastal bridges.

The results show that durability damage has a remarkable impact on the resilience. After 100 years of service, the seismic resilience of bridge with poor disaster-prevention capability has greatest reduction, about 18%. In addition, the improvement of the disaster prevention capability can stabilize the resilience of the bridge at a higher level.

In this paper, the time-varying fragility analysis of case bridge are evaluated with considering chloride ion erosion and concrete carbonization, firstly. Then, combining fuzzy theory and fragility analysis, the triangular fuzzy values of resilience parameters under different service period are obtained. Finally, the life-cycle resilience of bridge in different disaster prevention capability is analyzed.

In order to explore the damage probability of bridge engineering in the event of earthquake in the construction stages, the analysis method of seismic vulnerability in the construction stages is proposed in this paper.

Based on the joint simulation function of construction stage conditions and seismic response conditions of MIDAS/Civil finite element analysis software, combined with the method of IDA analysis and compared the relationship between demand and capacity.

The research shows that: (1) the average seismic loss in different construction stages varies greatly; (2) the seismic vulnerability varies greatly in different construction stages. The vulnerability of the bridge in stage 6 is determined by the longitudinal direction of bridge. Therefore, during the construction of the whole bridge, we should focus on strengthening the disaster and loss prevention strategy of earthquake insurance in the longitudinal direction of bridge. (3) The application of the secondary dead load mainly affects the fragilityin the longitudinal direction of bridge, but has little effect on the fragility in the transversal direction of bridge.

This paper is to explore the seismic vulnerability of a typical simply supported continuous bridge during the construction stages, and to trace the entire construction stage of a typical simply supported continuous bridge. According to the characteristics of the system transformation in the actual construction steps, demand-capacity ratios were established based on incremental dynamic analysis (IDA) and performance indicators of moment curvature and stability, and the seismic vulnerability research is carried out for the construction stages prone to earthquake damage. Furthermore, it provides a basis for seismic risk assessment of such bridges in different construction stages.

The design of compliant towers in deep waters is greatly affected by their dynamic response to wave loads as well as by the geometrical and material nonlinearities that appear. In general, a nonlinear time history dynamic analysis is the most appropriate one to be applied to capture the exact response of the structure under wave loading. However, this type of analysis is complex and time-consuming. This paper aims to develop a simplified methodology, which can adequately approximate the maximum response yielded by a dynamic analysis by means of a static analysis.

Various types of time history dynamic analysis are first applied on a detailed structural model, ranging from linear to fully nonlinear, that are used as reference solutions. In the sequel, a simplified analysis model is formulated, capable of reproducing the response of the entire structure with significantly reduced computational cost. In the next stage, this model is used to obtain the linear and nonlinear response spectra of the structure. Finally, these spectra are used to formulate a simplified design approach, based on equivalent static loads.

This simplified design approach produces good results in cases that the response is mainly governed by the first eigenmode, which is the case when compliant towers are considered.

The present paper borrows ideas from the area of earthquake engineering, where simplified methodologies can be used for the design of a certain class of structures. However, the development of a simplified methodology for the approximation of the dynamic behavior of offshore structures under wave loading is a much more complex problem, which, to the authors’ knowledge, has not been addressed till now.